Viewing all customer Discussions for:

S385-32 32" Series 385 Channel Balance

These are photos of the window balances I need. I need a total of 6 balances. I also need 4 of the block wedge things that attach to the top of the window. They measure just over 2 inch. The number on the balance is. 31 6 FV CMC 0. Please let me know if you need more photos. Thank you. ... (cont.)

We are repairing a window with 1 broken channel balance. It is an aluminum frame single hung window, approximately 31" wide x 67" tall. There is a faint stamp on the channel balance track which looks like it says: 3160 ojBSI There are two slots for the metal hook from the channel balance, but ... (cont.)

I have not foto of the actual slide. The Milgard window measures: 30 1/2"wide by 32 1/2" long. This includes the frames and hardware The handyman says it measures 30x 32 . A foto of a similar window sticker in a different size says: Series 6210/6230J/6270 H-LC30 and H-R20 the sliders seem b ... (cont.)

Need to replace a few of these as they are failing in our home (broken cord). 32" metal portion. Will order one dozen. Thanks.

It's 32 inches long and 1/2 or 9/16 wide. "Stamp says 3190 BSI LF 22"

I have Caldwell window channel balance but not sure what length to order. The metal part measures 32 inches and the pictures are attached. Please let me know if this is available & what part number is to be used for ordering. Thanks TJ

I need help to get the right channel for a non tilt sliding window the length is 32 inches and width is 1/2 inches thanks Jalal

The balance I will need is 31 inches long and would be series 385 i can tell by the winged top and bottom pieces. I am not sure about a weight range. My balance on the bottom shows 31 3 EO i believe or EQ not sure. The windows were put in with the new house in 1997 we are 1st owners. I will def ... (cont.)

The measurements on both bars the metal part is 32"inches these are the photos:

I need to replace two of these, but I am confused about which one to get. The numbers don't match completely, so thought I would ask. They are 32" long (just the metal rail part)

The stamp on the channel reads 32 9 DW CMC 4 This is for a Milgard non tilt window. The metal portion of the balance is 33". Which option under product code S385-33 do you recommend?

I measured and the metal bar is 32" long. We have Mill Guard windows. I'm not sure of what weight I should get and I don't see any markings that indicate what the other channel that is working is. Any input you can give is appreciated. I want to order and get the right one the first time so as not ... (cont.)

I have two identical single hung Windows. All four channel ballances are broken and not repairable. The problem I have is the ballances are not the same length for both sashes. The visible glass of the sash measures 32 and 5/8 inches, the overall length is 35 and 1/2 inches. The weight of the sash i ... (cont.)

Hi. I am looking for a 32" channel balance for a Philips window. Base to the first slot is 36.25". Slot to top clip is 25". Base to top clip 62". There are no visable markings on the existing channel balance. The window appears to read pp-03, IGCG, 1053, CBA, 96. This is on the 3rd attached p ... (cont.)

I have attached photos of my channel balance. I believe it is Model# S385-32. Could you please confirm this before I order. Regards, Leah

Only numbers on it are 31 5 AX CMC 9. Measures 32in long. Looking at your site appears the Series 385-32 would be the correct item. The shoe measures at 1 3/32. I will need to replace 4 of these

i'm looking to replace two crank mechanisms for our casement windows. I need both the crank and base parts. also, i see some spring balance parts, but I need to replace all 4 spring balances on our two vertically hung windows - white vinyl 32" long, 1/2" wide. I didn't see with part on your sit ... (cont.)

first pair marking: 31 9 38# LN CALDWELL second pair marking: 29 3 CS CALDWELL several other windows are very hard to open and close. should replacement balance springs fix the problem?

Hi, I am looking for block and tackle channel balance as seen in the S 385 to fit a 48x36 and 36x36 single hung windows. What inch will correspond to these windows ? Thanks for your reply.

I have stamp on balance 32 5 CW CMC 10 looks like 385 series on pictures, but with option I have to choose? Thank you very much Alex