Viewing all customer Discussions for:

26-021 Pivot Bar, 2-1/2"

Channel balance I need?

need this part

window tilt pin with the number 2651 stamped on it.

Need assistance in identifying these replacement parts

Here are a few photos of the piece I am looking for. There is "265D" stamped into the piece. Also on the other side there is a "7" stamped in. Length ? 2 ½" Hole spacing ? 1" Width ? 5/16" Thickness ? 3/16" Screw Length ? ½" On your website I see Product Code: 26-021. This looks like the piece but ... (cont.)

My overall window is 39-1/2" x 53-1/4". I need balances , locks and the metal device at the bottom of each sash that gets inserted into the show of the balancer. Thank you. -Domenic

Balances on vinyl windows in our shamrock mobile home are breaking need replacement hardware

Window sash balance pivot bar 6984

The channel balance is 9/16x 9/16 and marked 26D. The Shoe is also 9/16 thick and 1 1/4 wide. The pin is as you can see broken but is mounted in a full length hold at the bottom of the window and needs to match the shoes. Just need a set of the three that will work together have two windows (4x ... (cont.)

need replacement for this, can you help?

I order Series 795 window balances. The balances fit the channel but the Balance shoes that were shipped with the balances don't fit. In the picture above the old shoe is on the left and the new shoe is on the right. The old shoe is approx 7/8 or 15/16. I also need to replace the Pivot bars so th ... (cont.)

The pivot shoes on about half of my Wenco windows are broken. Not sure which one to get. Thanks for your help !!!

Hello, All my house windows are 15 years old. Since last year, most windows have lifting problem, caused by broken plastics, as shown in attached photos. Since I can't identify Window brand. Hope you can help to find the right parts for me. I'd order those parts for all 25 windows replacement. Than ... (cont.)

I was needing 3 of these I was wondering if you had them if you could let me know I need them by Thursday.ThanksMichael

I can't remove the part then the window will fall completely out. Its the spring that is inside the frame to make the window go up and down. The window is 64" long and the spring measured at 53" not sure what else I can do? Let me know if this will help to get a replacement part. Thank you ... (cont.)

I couldn't get the images uploaded on your site. This is a Milestone Single Hung window - 27". Also, if the window doesn't stay in the up position, what part(s) do I need to repair? Thanks, Patti

Hello,We are confident that the S795-21 will work in place of the balance that works with this shoe as long as you measured the metal channel and chose then 21D stamp based on the stamp on your old balance. You may want to switch the shoe that comes with the S795 balance with our 15-195B shoe with a ... (cont.)

Static part. Is inserted into channel on the bottom of the window. This part then inserts into upright channel part which. Slides up and down with the spiral spring don't know if i can get email or text on this device. Please call 770 846 7170. Thanks. Chris

Phil

I would like to replace the window hardware on my park home. They are tilt in style, bottom windows only and top window is fixed. I searched but can't find the manufacturer of the windows so I hope you can help. I've attached pictures of the shoe and balance hardware. The original balance hardwar ... (cont.)