Viewing all customer Discussions for:

26-040 Pivot Bar, 3"

I am needing to replace the shoes on several windows along with spiral balancers

I'm trying to find the part that is connected to window in photo 1 as photo 2 shows that part being broken and window not connected. I don't know what's it called just trying to get my windows fixed.

Several balances are broken per the photos. There is no weight number on them. I also need the pins. The screw hole for that is 2 inches from the end of the pin per the photo. These are screwed to the frame through the middle of the spring. I estimate the sash to weight 15 lbs. I am very handy and c ... (cont.)

I need both pivot pins that would fit in this sleeve. Right side and left side. Pins are missing entirely so I don't have pictures of them, just the sleeve

Need a replacement for this part. Mine is broken and to replace the window woulds be very cumbersome since the fin is in the wall and exterior is stucco. No name on the window but this is the image and Google provided you're company on the search thank you

Must you use a balance with the "L" stamp on the left side or could you just flip one stamped "R" over?

Hi Swisco Team, I need Silverline Tilt Block and Tackle balance for size 33 3. Please help me find a suitable replacement. Thank you for your help. John J.

I have Gorell 5300 series double hung windows that I need to replace the springs and pivot shoes, will this spreader work or do I need to cut the frame? I would like to remove one so I can see if there are any part numbers on the springs and shoes to make sure I order the correct items. Thank you ... (cont.)

Hello, can you help me track down a part for a tilt out window?

This goes into the window so I can install it and close it shut. One on each side. So I need two

The parts are for Anderson Silver-Line windows that are 10 years old.This appears to be a combined unit (spring and shoe) where the spring has broken. The clear plastic triangle shaped piece is what holds the spring in place mid-frame.Please note the "7" on the shoe. These windows use 2 per sash; on ... (cont.)

as the bottom is broken off and still in the window sill. additionally I see both pivot bar 26-040 and a cast aluminum pin similar to 26-400 I dont see a pattern (all top sill are 040 or all 400) are 040 and 400 interchangeable? the house is built in 2001 - but there are no branding on any ... (cont.)

I believe this is an International window. The stamped number on the balance is C 2040. The Balance is 21 inches long and the window weighs 20 lbs. The pivot shoe I believe is the 15-015 on your website. I believe I need a S770, 21 inch, option 21D. Please advise. ThanksMike

I am trying to replace some parts on my windows, I believe they are called double coiled window assembly's. The windows are double hung Simonton windows from around the year 1999.

Looking to find a replacement pivot shoe But no size marked on it

Need the part that the sash slides into on a Silverline 8501 series double hung window

I am looking for help with buying and replacing the coil balancers in the attached photos. Scott

Thank you for your help. This is the lower sash of a double-hung window. The sash weighs 14.6 lbs. I need to replace the pivot bars, the coil balances, the pivot shoes, and the holder for the coil balance. The number 4 is on the plastic pieces for both the coil balance holder and the pivot shoe (the ... (cont.)

Look for these parts for my single hung window

pat 5.353.548