Viewing all customer Discussions for:

26-040 Pivot Bar, 3"

please help in identifying the part in the attached photos. i believe it is called a pivot shoe dimensions are 1" wide, 9/16 deep, 2" tall for a tilt window similar to your part number 15-045 but is deeper

I was told this was a ipex series jeldwen I need both sides for coil balances also tilt latch sliders

Looking for the sash balance spring assembly. The window sticker is attached. As well as a picture of the assembly. It is a single hung window from MI Windows and Doors with number 121237411.9.

The shoe measures 3 3/4" long when together 1 1/2 inch width Depth 1/2 inch I need both pieces and the bracket they it attaches to. 2 1/4 lower 1 1/2 upper

Hi repeat customer. I would call this the pivot pin window is 30 years old. Thanks Rodney

Hi there. I have some vinyl windows in my home of unknown origin. The one in the bathroom decided to come crashing down. Both balances are broken. There are no markings on them and i have no clue how to remove them or measure them for the correct one . Can you help ?

Hi, I am looking for a window sash balance replacement for both sides. I sent you photos of the old balance and attachements. The old balance is 29 inches long. The weight of the window is 20 pound. Hope you are able to save my window aither with the exact balance replacement or with somthing equiv ... (cont.)

The brand of window can not be determined. I need to order the assembly shown in the photo? Can you help identify what i need just by the attached photo? Thank you in advance

All I see is a #4 on these plastic pcs.

I need (2) sash pivot bars that fit the pivot lock shown by the attached pictures. An additional picture shows the tags/stickers that were attached to the windown. Please call me at any time for ordering and any installation advice you may offer. Thank you much! Steve

Im trying to help a customer and im having a hard time determining which part to order. I believe is the 15-154 all the dimensions match up . I was just trying to determine and am second guessing myself. And information youre able to provide is greatly appreciated! Thank you !

Need part id for this. Has pat# 5.353.548. Approx 4" tall 1" wide. Tension seems to work ok, but upper housing broken. Also I don't see cut out to remove. Is housing simple to replace with that coil spring tension. A video reference would be appreciated. This window is traco series tr4200 dh ... (cont.)

I have brokern window balance parts and I can't seem to locate a name or a part number. This is from one side of the window. The both sdes are the same.

I need to replace 4 pivot shoes for my tilt window. What replacements do I need?

I will need coil supports also. Thanks

I can't find the brand of this balancer.

Can you please assist us with identifying these specific tilt bars? We are unable to find an exact match on your website.

Hi, I need to replace a pair of coil balances/pivot shoes as shown in the pictures. spring is marked 730x. Window is a american craftsman silverline model 8500. 28x58" the pivot shoe has a handwritten "7" on the back side. The window sash weighs approximately 11 pounds. Please advise what part n ... (cont.)

I believe my windows are Simonton or CertainTeed. Approximately 25 years old. Any part numbers are absent/illegible. Bottom sash weighs 20.4 pounds. Require part numbers for replacement roll springs, supports, bumpers, lock shoes, and sash pivot bars if required. Photos show installed/broken, ... (cont.)

The pivot bar is 3" long with a about a 1/4" offset as shown in the pictures. Also, it is about a 1/4" wide and about 3/16" deep excluding the offset. The surface latch is 2 3/4" long as shown in the pictures and about 3/8" deep by about 3/4" wide. I am looking to get these in both left and right si ... (cont.)