Viewing all customer Discussions for:

15-002 Channel Balance Shoe, 1" Depth

Window is a 24700. Length of channel balance is 28" Width is 1/2" Top looks like a 19-005 Shoe size is 1 1/16". Not sure if a 15-001 or 15-002 would work Stamp on existing channel balance is 24-7.

Hello, I believe you can make these by reading some of the other posts.(which is very helpful on your part). The length is 25" Stamp 2430 I'm hoping you don't need all of the other dimensions. If so please let me know. I need 4 of these (2 windows), also I will need 4 take out clips part # 16-002. ... (cont.)

Please see photos....12" Channel Balance, 1/2"... 1120 code Seems like an s390 will work, but the end fittings are unusual. Can you confirm the correct parts from these photos...?

I am trying to get the exact part number for a window balance 25 in long1/2 WideModel 2430Thanks Mike

Will need 6 of these.

can i get just the ends or do i have to buy whole mechanism? if i can get just the piece, it appears to be riveted in, does the new piece just snap in or does it have to be riveted?

Hi,Need 8 of these for 4 windows. House is a Del Webb in Sun City Arizona, built in 1975. Couldn't find a match from your 1/2" wide channel balances. The windows are non-tilt vertical double-hung with aluminum frame, dual pane. Dimensions approximately 71" by 23". The guide stop tab for the scr ... (cont.)

The channel is 29 inches long stamped with the numbers 28C USB

Marked with "BSI 9 C". Both top-guide and bottom shoe are non-winged.

It's from a Nuprime window and has the number 1820 on it. The metal portion is 18.5" long.

These photos are from the same type of window but smaller , I need (2) 47" balancers for a window that doesn't have them in place they are missing. The window sash measures 48" high and the pictures I sent are from a window that measures 18 1/2 " high

Channel length: 26-1/2 Window Weight: 5.8lbs Quantity: 2 (Stamp: 81165)

I need to purchase replacement ends for my window balance. The end was like a press in fold over end. I have included some photos. Let me know if the end kits are available as the balance works ok

Hello, I am looking for channel balances for 2 different windows and would appreciate if you could help me determine the correct ones as well as pricing. I included some pictures and below is the information I was able to retrieve after removing them: Window 1: Brand: BSI Stamping: 353 ... (cont.)

21 3/4" X 1/2" channel balance non tilt #141

I have attached pictures of a balance with a unbroken top, the bottom 'wings' have broken off - the wings were the same size as the top wings... I need 4 x 24in with #2320 2 x 24in with #2330

Hello- I am leasing an office and am in need of balances for 2 windows. I am looking for 1/2 inch. I viewed my options online however bam not sure which one is the correct one. I appreciate your assistance. Thank you,Cherie

You may know just by giving you the window company name. 15 years ago I purchased replacement balances from the company in Miami, FL. They have since gone out of business. The windows are likely 25-30 years old (at least). Your S371 looks very similar. The main difference appears to be the use ... (cont.)

I need 4ea balance springs, metal channel is 1/2" by 28" without top & bottom pieces. #2740 stamped on side. I need 8ea of the little tiny clips the go on the sides of the sash. I need 2ea of the latches, holes are 2 1/4 in on center, opening for the striker is 3/8th of an inch.

Hi,I'm not sure which series this will be for this old sash.There's a 2530 marking on it.I think the bottom is 15-002 but not sure about the top shoe.Thanks!!