Viewing all customer Discussions for:

15-046 Pivot Shoe, 1/2" Thick

Good Afternoon.I hope that you might be able to help me. I have a double hung window that suddenly will not stay up - it appears that the weight/balance pieces have separated and my attempts to reattach have been short lived. I have been in touch with the company that installed the window for us a ... (cont.)

Looking for two replacement pivot shoes for the upper sash. Also, I cannot see any breaks in the track for shoe removal, so will likely need advise and/or a jamb spreader. Jamb overlap on each side appears to be 1/8"+. Will jambs have that range of play to spread? Looking to get parts FedEx'd to sa ... (cont.)

Hello could you please tell me the part number this is. It looks 2 1/4 inches long, 1 1/4 inches wide and a half inch thick. Thank you for your help.

I believe this is broken. I need replacement. There is not identification. Roughly 1/2" thick, 2" high, 1 1/4" wide. I need a spiral balance for this as well with charging tool kit.

Please look into this part and send me the part no. w=1.25 l=1-7/8' and thickness= 1/2"

I'm looking to replace the balances on an original window in our 1999-built home. I believe it is a non-tilt sash window (vertical slide) and appears to have spiral balances. Any help/advice you could offer would be most welcome. Thanks! - Jeff

Here is the picture. Need 4 balances and 4 shoes. Balances are 28"long x 9/16" wide x 1/2" high and the shoes are 1 1/4 x 2 1/8 x 1/2" Thank you

This items are used on Silverline windows from the early nineties. I'd like to get six of the window clips 1291, 6 of the tilt mechanisms 1289, six of tiltrod holders 1293&1293.

The part is 2" tall, 1-1/4" wide and 9/16" thick.

In the picture I have included, the left side of the widow is vinyl and the right side is vinyl but much larger. I think I can cut the left side and get the shoe out. Do you have vinyl sash stops 3/4" that would fill in the cut? Am I doing the correct thing by cutting the left side. Greg ... (cont.)

Appears to be 23"long, 3/8 diameter, and an orange tip..

Team,I am in need of help. You have always been so helpful and smart with these things and normally with vinyl windows, I am good but I cannot remove this balancer to show it entirely. Here are some photos and info. White vinyl single hung window with bad left and right balancers....also one shoe ... (cont.)

I have ordered you 26-089P for my "Pacific Industries Windows" and they worked out great. Will be ordering more. Now I need the Pivot Shoe for these windows. The current Pivot Shoe in 2" tall, 1" wide and 1/2" thick. The close I can find on your website is your P/N 15-046. However, it is 1/ ... (cont.)

I need to make sure I have the right pivot shoe. I originally ordered 15-015 and 15-047 but cancelled my order because I wasn't sure. Please help.

Hello:I have the Series 765-27 (stamped with a 5) Channel Balance. I need to replace the Pivot Lock Shoe on both sides in multiple windows.The original Shoe measures:THICK 1/2"WIDE 1 3/16"HIGH 1 13/16"I find no Shoes in your listing with these measurements, but this Shoe #15-046 seems the closest ... (cont.)

need 6 pivot shoes do not know window manufacture. see attached photo's

I purchased the 15-046 for my window. The height and thickness are the same as the broken one (2" X 1/2"). However, the width for the one I need is 1" and the 15-046 is 1 1/4". Is there a pivot shoe available that is 1/2" thick with a height of 2" and 1"wide?

Pivot shoe

Spiral balance stopper

Helllo!I broke one of the shoes on this window and need a replacement. I might buy two and just replace them both. I think I also need the spreaders you sell, as I don't see a cutout anywhere up or down the track. Finally, I think I need a spiral window return charging tool.Thanks for your help,Br ... (cont.)