Viewing all customer Discussions for:

75-006 Spiral Balance Charging Tool for Tilt Windows

2 spiral balance 20 inch. 2 pivot shoe

Hello. We have one window that won't stay up. You guys came recommended. Can you tell me what we need to fix this? Thank you Amy

I need to order two black tip spiral balances for a better bilt window. I will also need a tension tool item 75006. The vinyl casing is 35 inches long and the windows were installed in 1994. One observation, they each have a different tip but basically the same on the end of the tip. Please let m ... (cont.)

All videos I see demo replacing the lower window balance. I understand the actual replacement of shoe & balance is the same, however, I am unclear as to where to locate the shoe and do you add the same amount of tension, etc? Is there anything I need to know that is specific for the rear/upper wind ... (cont.)

The top and bottom windows will not stay up

Hi all,I've removed the spirals, and show them in the pictures. Also one picture shows the mounting for the bottom of the spiral to attach to. They look like they are destroyed. The long tube is 36 inches, and the short one is only 30 inches. They have red tips, so that is good to see, but the e ... (cont.)

The window assist are broken, the lead keepers are busted out of holders that help lift window. One picture shows the lead keeper holding the rods which are connected to slide. Hoping you can help me out, thank you Don

1/2 inch thick 2 inches height 1 3/16 inches width

This appears to be a plastic part with a metal retainer to support the pressure from the spiral balance. Looking for several replacement sash cradles. Any ideas?

What parts do I need to replace the tilt mechanism and the tension rod?

Hello, I have attached photos of my pivot shoes, and wanted to see what you have that may work for me. They measure 15/16" w x 2 1/8" h x 1/2" d. They are in a 1996 Kingswood. I know your 15-212 is close, but want to be sure so I don't order the incorrect one's again. Thank you so much! ... (cont.)

This bottom end , above nylon pin receiver, is broken Can I buy end, or entire assembly?Do u have assemblyPlease advise thanks Russ

See attached photos for specifications of my MI windows BB740 aluminum windows also called 3540 series. Need help ordering two types of parts:1) Need 1-2 tilt latches which lock. See photo. 2) Need spiral balance case coverings for 6 windows since most of the casings are cracked from the sun and ... (cont.)

I have taken photos of the parts I need. Please look over the pics and let me know the right parts to order. I also need a tool to wind the spring. The springs are 25 inches long ad the tips are Red in color with one pin through the end. Some of them have two pins. I need springs , latches and slid ... (cont.)

This is my old part ... it measures 1" wide x 1/2 thick x 2" high I cannot identify a replacement shoe

Hello Swisco Teams. I am looking for tilt windows pivot shoe for bottom sash and top sash pivot shoe come with filer. (Looks like a double in track) Window old may be 15 years? Thank you.

Hey I need to know. What Spiral balance and color tip i need for my window. Currently have 8 spiral balances for my 64x39" window. I believe they are 32" blue tips 3/8 tubes. There are 2 spirals on each side for top and bottome panel equaling 8. Can I replace Them with just one heavy duty on each s ... (cont.)

Please let me know which balances and tool i would need for this. Thanks Rich

I need a 10" plated steel tool to adjust the lower pin on the balance rod

I'm curious about which way I'll need to turn the spiral. We removed both balances and noticed the tension when doing so, and didn't know we'd have to add tension back until we got everything back together. Now the sash is fairly difficult to raise and has no staying power to remain up. It's kind of ... (cont.)