Viewing all customer Discussions for:

16-002 Take Out Clip

I moved into an apt. that had a single sash metal window that did not stay open. After a real struggle I was able to remove the window. The window measurements are as follows.The frame is 36 inches wide and 61-1/2 inches high. The removed sash is 34-1/2 inches wide and 32 inches high. There were ... (cont.)

Hi- I have 10 windows which need balances replaced. I can't see the difference between the 15-001 shoes & the 15-002 shoes. Our balances are either # 351 or 390? 22 inches from end of metal to end of metal. I also want to replace the clips on the metal sash, some are broken, buy?? How the he ... (cont.)

Hello, We have several double hung windows, where the balances have fallen out and/or are no longer working. I can't seem to identify the manufacturer of the windows and would like to replace the balances but don't feel confident identifying the correct one (I don't know anything about windows). ... (cont.)

I have 3 identical windows in my new home. 2 of which need repaired. they all seem to be in different situations. 1 has no sash guides. The second has a balance of some sort and is inoperable I can't even move or disassemble the sash. The third which seems to be functioning perfectly. I cannot figur ... (cont.)

I know I have a 1/2" x 29" shaft; however, I'm unclear on the top and bottom pieces. I've attached some photos. Let me know if there's extra information you need. Cheers, -Tommy.

I need to replace a broken channel balance from a Nuprime window. I initially thought that the 17" series 390 (version 1640) would be appropriate, but had reservations because the shoe looks slightly different. I have included photos and am hoping that you can identify the appropriate balance/shoe ... (cont.)

this question is for mike. i saw your video on replacing non-tilt window channels. i followed your direction but the right side channel keeps falling out of the window casement. can you tell me why that is happening & how to correct? thank you

Good Day, I'm in need of a set of Channel Balances for a Milgard window. It's 27" long, not including the plastic ends. It has no stamp, but is marked "26-4 HD5 CMC 45" I've studied your catalog and can't quite match the shoe. The window was installed maybe three years ago. The photos show the ends ... (cont.)

I need to order replacement "tracks" for 2 of my bedroom windows. T They are Patriot windows in my Ryan home that was built in 1989. I have enclosed a picture of the metal "tracks" needing replaced. They measure 27 inches long and are metal and contain a string and pulley that allows the window t ... (cont.)

Hello, I'm looking to replace my in-law's channel balances for their windows. For the last 10 or so years, they have used a stick to prop up most of their windows! Just needed some advice on which take out clip, top sash guide, and channel balance to purchase: 1. Take out clip - ALL the window ... (cont.)

I need to possibly replace a few channel balances in my windows. The sash guides have broken and the channel balances become non-functional. I don't know whether just to replace the sash guides or the channel balances or both. Can you recommend what is needed? Attached are pictures of the brok ... (cont.)

Hello Swisco, Ineed to replace the sash balancers in a metal frames window. I have provided pictures of the sash balancer and a picture of the channel that the balancers go into. I think I need a 16" 351 channel balancer. Am I right? This is the only window of its type in my house so I'm not ... (cont.)

I need some 1/2" Wide Channel Balances series 350 i think, so i am sending some photos just to be sure. On the metal channel that is exactly 20" long measured, there is "19B" inscription. If i refer to the 350 series it should be 19xx option number 10 20 30 or 40 is that number the spring strength ? ... (cont.)

I have two lengths of completely broken balances from Gapco: 22 inch metal portion stamped 2140D and 3.S.I 34 inch " 3330 and 3.S.I Pictures are included. Need to know your right numers to order. Thank you for your help. Peter

Hello Swisco Staff: I wish to replace a number of non-tilt channel balances. Using your online catalog, I have tried to identify the replacement balances, but I need your help, please, to be sure I get the correct item. I am also interested in knowing whether you offer replacement pivoting s ... (cont.)

Am unable to find the part number but it resembles the following two and am not sure which one to purchase. 18-166 Top Sash Guide, Kinco 18-044 Top Sash Guide, Kinco This is a Non Tilt 1/2" Channel Balance window was made by Kinco and its a M/I home built in 2004. I don't see an option to up ... (cont.)

I have nu-prime double hung metal windows in need of repair parts. Side pieces #16105, 1610A, 24205. I have about 60 windows to repair. Any help is appreciated

1) If I use the fully assembled series 350 "3340" balances to replace existing worn out balances, do I need to purchase any other parts or would I have any need for the rivit tool? 2) I saw the installation instructions. Do you have either more detailed written instructions or preferably any ... (cont.)

I believe I have chosen the correct Channel but the image is too rough to verify the choice. Is it possible to send an example and have it returned with the order? Here's what I have so far... (6) S380-26 : Channel Balance (note: 2540 BSI label from the part) (4) 62-105 : Heavy Duty Pointed ... (cont.)

Please give me some instructions on the installation of my 380 series balance rod.I tried to install it on my own but could not get the hook on the rod to slide in correctly in the open slot on the side where the rod needs to hook and stay firmly in the original position.As a result of my effort, th ... (cont.)