Viewing all customer Discussions for:

19-029 Short S-Clip

I ordered 4 of your 751 channel balances for original Marvin Tilt PAC window. While I see the shoe comes assembled, does it include the short and long clips? I see you sell them separately.

This is for a tilt window. The spring/string mechanism is no longer functional. The shoe is broken. This is a spring with string type mechanism. The string attaches to the shoe via a little clip on the end of the string. Aluminum channel is 28" long and 9/16" wide. Window pane is 29 1/8" tall. ... (cont.)

please help. plain square channel balance. 24" long, code on back "924". top has hook, bottom has eyelet that clips into shoe. shoe is 9/16 thick. looks to be similar to S770 with out the clip at the top. please advise

I have two tilt windows, manufacturer unknown, with these balances. The channels are stamped 32F and are 32" long, 9/16" wide. They look like the S795 series except the spring is at the top, where the balance is hung on an S-hook in the track, and the shoes are not T-lock. The pivot bars, which all ... (cont.)

Good Afternoon: I have 4 channel balances that I need to replace. Windows / tracks manufactured in about 1995 from RIVCO out of NH. Channels are 25 inch with h 24 stamped on back. I want to make sure I am ordering correct channel balance unit.

Very similar to series 770 but the one I have has an extra rivet at the top where it hooks on to the window channel.

I have a 1 unit panel with 3 large double hung windows and 2 will not stay open. Prior owner (my father) never opened the windows (new hm built for him. Today I removed one bottom window to identify parts. Upon removal of window and removing the vinyl sleeve on sides the parts fell out. On both si ... (cont.)

Hello, I am replacing the channels on a few of my Republic windows and I ordered and received my parts from Swisco. I have had a very good experience with Swisco. As you will see from my pictures here, the tops of the channels are different and install differently. The Republics have a clip and bo ... (cont.)

HI EXPERTS, I NEED HELP TO GET REPLACE PARTS FOR THE WINDOW. 28" LONG METAL CHANNEL 14" LONG SPRING 1/2" CHANNEL WIDTH PART NUMBER 28B BSL RE

Looking for window balance Channel is 29 long 1/2 inch wide 1/2 inch tall Shoe is 1 Inch tall in a all directions by 3/8 thick Pl are assist with the unit needed

Hopefully u can identify the part I need searching has confused the heck out of me

can i get the series 770 balance with a rivet for an s hook instead of the screw cap?

Channel balance I need?

Pictures show the old balancer and that part that slides into the plastic track where it meets the part that holds the balancer's string. ( no picture shown of the part that holds the balancer's string) If you need more pictures please advise.I just need to be sure that I am ordering the correct b ... (cont.)

I have a tilting double hung "craftsman bronze" window installed in August of 2004. The window label is dated 07/13/04 - 3. The interior is wood and the exterior is a bronze colored metal. The balance for the lower sash has failed. The balance is stamped with DB B04 26 HD. The length of the metal pa ... (cont.)

Attached are photos of my broken window balance and shoe. The channel balance is marked 24E BSI. I don't know the manufacturer of the window. The shoe seems to match your part no. 15-169 and the clip that attaches to the shoe is similar if not identical to 15-170. The balance attaches with a clip to ... (cont.)

these are from.soft sash window frame. thanks Dan

Now Anderson. Tilt out and double hung. Can you replace this?

All my windows are broken in my home. House is 30 years old. We have been looking for 15 years. Trying to fix all of the windows. I need all hardware. I need all channels, all s-clips shiiryband long which are 1 inch and 2 inch. Looks like metal end caps that go on the plastic channel jams ( ... (cont.)

I'm looking for a replacement pulley block for a Loewen double hung window. I've included pictures of the removed channel. Spring is fine, but the pot metal of the pulley broke. The label on the inside of the channel is DB 102 14 REG.