Viewing all customer Discussions for:

S380-29 29" Series 380 Channel Balance

It's a 29 inch metal channel that appears like 19-005 top and 15-005 bottom. The stamp on the channel is 28 5 HR Caldwell. Will this correspond to 29" SERIES 380 CHANNEL BALANCE with 2850 option? I'm presuming that the stamp 28 5 HR Caldwell corresponds to 2850 option that corresponds to 28 to 32 ... (cont.)

I have the following sash and need help to identify the option. When I called the person helping me mentioned that it is odd to have '29 4 Caldwell 'stamped on a 29 sash. Per my research on your website 29" series 380 should be fine but I do not know, what option to pick. Please help me identify the ... (cont.)

I find this number 28 4 CALDWELL LM

I have 12 windows in home. Window is "milestone single hung 1000". So already ordered and replaced. Channel balance(S380-29, 2840option), top sash guide(1/2", 18-180), window sash lock(2-1/4", 90-005). I installed all window parts. All window is working well. But I got just only 2 window problem. ... (cont.)

on the side of the broken window channel balance it is stamped 28 3. does that mean that the correct replacement part is 2830?

Hello need to replace 4 window balances. Need Qty 3 of the 28 4 GL Caldwell & Qty 1 of the 28 4 FL Caldwell Please contact me with any more questions or details needed.

Hi,I would like to order a pair of channel balances. The current channel balance indicate 28C inscribed on it. It is half an inch wide and 29 inches in length.It's for a non- tilting window. It seems like S380 or S385 but is not sure about the shoe. Based on my measurement of the shoe it's 30/32 of ... (cont.)

Good evening, my name is Cindy. I just find out seven of our houses windows's Channel balance are broken. I don't know which one I need to purchase. I send you two pictures, length 29 inches, please help me identify the replacement. I already took old pieces, but they kind looks different. I try to ... (cont.)

I need 20 balances 28c 5/8 channel the top is 1" x 15/16" and the bottom is 15/16" by 15/16" feel free to call me to discuss my options. Thanks in advance Daniel

The windows supported weigh 14 lbs and 19 lbs respectively I also need 1 sash for wind measuring 33 1/2"

Need to know a part number so I can order some replacements. Thanks!

metal is 29" plus additional with plastic - its 1/2" wide marked 28C wings top and bottom please help!!

Hi,My name is Thanh Nguyen and I am looking for window balance replacement.My old window balances are shown in the attached photos. I checked the balance for any possible ID but did not see any beside the stamp of 28B USB. Length of metal part is 29 inches. Top and shoe are in the attached photos ... (cont.)

Hello, I need a replacement for a balance stamped with 28 4 LW CMC 11. The balance is 29" long. The bottom shoe has a 1" depth. The window sash weighs 19 lbs. Thank you! Brian

I am in need of 4 29" channel balancers. They are unique 28-c-30. The shoe on the bottom of S380-29 looks different than mine.

Hello - I seem to be missing a part on one of my windows. It appears to be a small white plastic guide. One of the attached pictures shows it on an adjacent window and the other shows holes where it apparently fits. The opposite side of each window has a long covered guide that I believe hides a spr ... (cont.)

Hi ! ... my house has 20 non-tilt windows all in same measures with old and useless channel balances, please confirm if you have it. My country of residence is not a problem to pay (AMEX card) and send them because I have a friend with USA address, thanks

Hello all knowing one. I need to replace my Channel Lifter, but don't know which one to get. OAL 29" 15/15 Including the plastic tips Aluminum Channel 28" 7/8 Width of plastic parts 15/16" Height of plastic bottom part 15/16" Channel width 1/2" And I don't have a scale to we

Windows are 51"wide and 32"high.

Good morning. I need to replace my channel balances and need help finding the right ones. The length of the balance is 29". I am attaching pictures. Thank you for your help.