Viewing all customer Discussions for:

S380-29 29" Series 380 Channel Balance

Hello, I am trying to obtain replacement window channel balances for my home. I was able to remove one and the only marking I see on it is "28B". It measures about 29 1/4" by 1/2". I'm not sure if the plastic bit on the end is separate but I will also need all new of those as well. In total I n ... (cont.)

my channel is 1/2" wide 9/16" deep and 29" long and has 28C USB stamped on itsorry 28" long !

Metal rail is 29 inches....

I have previously replaced the Balancer in a kitchen window and I have a handful of springs and string. Therefore, something has gone wrong. The window weighs 34# 51" Wide 32" High Balancer is 29" Long Please reply with the correct balancer and what might have happened

I need new channel balances for a DIY project. I have two different sizes: 23" shaft length with 22E stamped 29" shaft length with 28 D stamped. Both have the same top & bottom pieces as shown in the attached pictures. I need to order 6 of each, and want to verify that I am ordering the correct re ... (cont.)

I need 4 pieces 28 c

I think I have Norandex Windows, I live in Florida, My House is about 11 years old. I have several different size windows most probably have broken parts. I am not sure what I need I would like to do all the windows. I have sent photos.Thank You,Peter

Spring loaded window lift assist with the number 28C T on the bottom. the hook tied to the nylon cord is missing

I have a window that I need to replace both channel balance, its a 28C. From what I have seen the 28 c is a 2830. I am wantting the complete unit with the end sections already on the part. How much will each unit cost and how much for shipping to FL.

what I can see is : u 8 28c or u B 28c the channel is 29 inch length 9/16 width (1/2 inch).I don't know what the different options you have in your website.Please,help me find the correct one.Thanks!! JUAN Torres

Using your site to learn some terminology and how to measure them, I now am in need of these overhaul parts for three single hung windows (see many pictures attached for all parts and dimensions on those pics and also info below for windows specs).Hopefully the parts terminology I am using is correc ... (cont.)

Hello, What is part numbers for Milestone single hung series 1000 W/N 04789, 29" channel balance? Do you have 7 channel balances? My balance stamped 28B, shoe measured 15/16" front to back and side to side. Do you also have these? See photos attached.

I have a 29" metal channel on my window balance. I do not see any markings. I am going to replace both balances.After looking closer, I see a stamp that says 28B.

I have attached the sticker on my window and the stamp on the balance. Could you please tell me which one I need to purchase. Thank you.

Which model do I need for both of these balances? Is it recommended to replace both balances at once? The majority of my windows don?t work (they won?t stay up). They didn?t work within a year of having them installed 10 years ago. Is it recommended to replace the windows or give these new balance ... (cont.)

Please help me identify the right replacement part for thus channel balance. Thanks

Hello, This is a channel balance of 29" length and 1/2" wide channel. Besides it has printed the following numbers UB 28C. Please let me know if you could identify the plastic ends, and if you would send it assembled. Kind regards

Please, help me select channel balances. Original balance measures 29 In (no plastic parts included). The print on the back isays "2810 L". I need to replace channel balances for three windows. Thanks so much for your help.

name of manufacturer : unknown; stamped on part 28E; length is 29" (inches); length of wing is 1"; height of of 15-005 shoe os 1"; top and shoe has 1" length wings; channel balance looks like S380; Don't know if it is a 2840 or 2850 channel balance. It's for a non-tilt single hung window. The insula ... (cont.)

Metal portion is 29" and stamped into the metal towards the bottom is "28B"