Viewing all customer Discussions for:

S900-29 29" Series 900 Spiral Balance

Would like to convert about 20 conventional double hung windows to tilt out style windows. It appears SWISCO has the hardware parts for the job. Has anyone done this? Which parts work best? I did the original design on the house and think these were 'Crestline' but i'm not positive. Jamb slot is 3 ... (cont.)

I have taken pictures of the parts I need and I measured of the spiral balance. I also need a pivot shoe. The spiral balance is 28 1/2' long. Thank you, the windows are able to tilt. There are no color tips on the spiral balance tubes. The diameter of the balance tube is 3/8. The length of the tu ... (cont.)

I have several Spiral Balances that need replaced. I have two questions: 1. I have 3/8 balances but they have black tips. I do not see that option. Which tip should I order. My sash weighs about 11lbs. Picture of existing tube on tape measure attached. 2. I have 28.5 length balances. Should I ... (cont.)

Trying to replace a set of spiral balances & the pivot lock shoes. The tube measures 3/8" thickness x 28-3/4" long. Do I order 28" or 29" balance? Also, I don't see the pivot lock shoe on your website. It is 3/8" thick, 1-15/16" overall & 31/32" wide. Has a Red cam.

My name is Larry and I work for Mr. Handyman of Northwest Austin. I have ordered parts from you in the past. The length is 30 3/8 inches tip to tip. Orange plastic piece at the Spiral exit of the tube. The letters KRAO are printed on the galvanized part of the spiral balance.

Im in need of 30 balances, 30 shoes, and 30 sash pens that go into the shoes that hold the window in place. I believe I need 28"x3/8"

Hi, I had someone come out to measure the balancers & took pics of the pivot shoe. The balancer (spindle top measures 29" & 3/8 wide) the pivot boot is 2" top to bottom & an inch wide. I am attaching photos of the boot. He will need to cut a notch at top to remove.

So, inspected this MW window and is in need of balancers, pivot lock shoes, 1 tilt latch and possibly metal tilt pins, depending on your thoughts with the new shoe.I believe the balancer is S900-29 and -26 for upper and lower spiral balancer 26" and 29" x 3/8" tube, but sash seems light and tips are ... (cont.)

Please look at my pics and the products I selected. I also need on regulator cover. Do you sell those? The regulator body is 28.5. Should I get a 28 or a 29? Not sure what color is good.

2" pivot bar with one hole. Pivot lock shoe and window tilt latches. Built in 1997

I need 29" balance spring assembly for 53x28 kinro single hung tilt in window. The original is 29" long and 1 1/8 diameter

Hi Can you tell me if you have this window balancer ? 35 1/2 x 61 1/4 single hung window Thank you Laura

Hi, I have three Gapco windows that will not remain open. After opening the window(s) the sash closes slides down and will not remain in the position I set. All the windows are the same size 34w x 30h, all are aluminum 2 of the windows need the left hand (looking from inside to outside) spiral t ... (cont.)

I need to replace our window balance on a couple of our windows. There is FT B 1 printed on the round tube, and it is 29" long. I attached some pictures. I believe the windows were installed in 2000 or 1999. Any help would be appreciated. Kevin

I have 8 large windows with each sash weighing 20 pounds.I also have 2 smaller windows with each sash weighing 13 pounds. The rod length for all the sashes is 29 inches, with a rod diameter of 3/8 inches. I believe that the "Red Tip" balance will satisfy my needs for both window sizes, but I'll need ... (cont.)

HelloHere is 2 pictures of the window balance i need to replace in my windows. These are from 1999 MW Twinseal Double Hung vinyl. The lenght i need is 29" and 18". 3/8" diameterNeed total 29"-818" -2Let me know any other info I would like to order these Asap Thanks

My balances are 29" long with Blue tip See pic. My pivot shoe is 2"H x 9/16" thick app and 1 1/8 wide app. the 1 1/8 isn the app with of the channel. i haven't removed anything so I can t get exact measurement. i hate to remove them until I have something to replace them. I'll have to cut the ... (cont.)

I have a 3/8x 29" spiral tilt window but can not make out the color. The sash weight just under 18lbs. Which color co I need to order?

I need to replace the spiral balance on casco single hung tilt windows. Do they use the 5/8" diameter? They have red tip and were 29" long

Hi I need 6 of these Balances and 1 install tool 4 window locks