Viewing all customer Discussions for:

S180-05 5 lbs Series 180 Coil Balance

silverline double hung windows i need the primary and secondary balancer and the balance foam plug. not sure if i need to replace the coil, they are still there. the sash weighs 10.8 pounds if i need new coils.

I need to replace the tandem coil springs in a Silverline 8500 series window. The coils are stamped as follows: 5DD and 5ED. I need to know what part numbers (your numbers) to replace them with and which coil goes in the pivot box and which goes in the tandem box. Thank you.

I need 2 balances like this for a sash that measures 34 3/8 tall by 49 1/2 wide that weighs approx 20lbs

I need to replace the coil balancer for this window. I believe it's an American craftsman window. The only marking is a number 5 on the lower part

Hello here is a photo of one of the two constant force springs that i need (left and right) the bottom window weight is 17.5 LBS the numbers on the springs are 5.15x and 4.16x i hope this can help in identifying the correct parts Thank You Marc,

I need spring balance coils for three Reliabilt windows. One has the label 5KC and the other coil has7KC. Also I have a Harvey Window and also need the Pivot. First two photographs. Thank you, Pablo

Window will not stay in place. No knowledge of this type of balancer. Would appreciate it if you know and have replacement parts . Thanks

This is what came out of my window sash. Note the upper housing has a piece missing from it. Looks like the bottom is 4lb and the top is 5lb, there were numbers on the springs that did correspond with the casings. Can the whole things be replaced, they look pretty worn and cracked, and what would th ... (cont.)

Trying to find the right part for my window, this is what I found when I took the window out. Thank you.

The tongue of the coil has a print of "5EC". Does it mean its stamp number is #5?

We need to replace two traco quick tilt constant force balances. I took pictures of how it looks now. The window is Traco. Maybe you can help me by looking at the pictures. And what really needs answered is how do we take out the old balances out without ruining the window? To me it looks like a ... (cont.)

I would like to know where can I get this balance. My window size 35.5 x 59.5.

Hi,I have a project with wood windows, which I'm going to retrofit fit with coil balances. The wood sashes weight 10 lbs each. Attached is a picture of two coil balances used for such a project. I personally haven't completed such a project but the idea came from another contractor that cut an ope ... (cont.)

I need 2 ,one for each side what looks to be 15-086 and 15-807 pivot shoe or maybe tandom coil housing the window (lower ) weigh 18 pounds, S180-8 for springs ? . Also need 2 16-024 mounting bracket and 2 of the top locks that measure 11/16 wide x 1 5/8 long. pat number on the window pivots are 5353 ... (cont.)

i looking for balance spring series 180 & 10lb. the maximum i saw was 9 lb. thank you..

Hi. I am looking for this pivot shoe with springs, it comes from a silver line window. Thanks for your help. David SK Maintenance

I need too replace the balance in my tilt window

trayco double hung windows. the coils on both sides of the lower window have broken. They were lifetime warranted parts for the windows but it seems Trayco has been sold several times and the last company went out of business. If you can match these double hung balances I would appreciate it..and ... (cont.)

good day i need to replace this part ,what do you recommend. thanks

The coil strap on my vinyl window has snapped. The window is an LbL vinyl series 2600 SH 24"x42". The strap channel is 9/16ths of an inch wide and @ 1-3/8th inches deep.