Viewing all customer Discussions for:

S795-28 28" Series 795 Channel Balance

I believe the window shoes need replacement because the part at the top of the shoe that hooks to the balance has broken and the balance retracted to the top of the window channel (hopefully I'm using the right terminology). I think the part I need is 1-1/4" T-LOCK BALANCE SHOE, CLOSED CAM (Product ... (cont.)

Hello, I called in and was directed to send in some pictures to aid in you providing me some guidance. I have NVR builder grade windows with channel balances that match your Series 795-28. Mine are stamped 28C. Here is my issue and what I would like advice on. 14 of my downstairs windows a ... (cont.)

Locking for this plastic pivot shoe

this connect the window to the balance. the balance had the markings on it : 28B CJ BS1 VL

I have a Ryan home with what appear to be NVR manufactured windows, and the shoes for channel balances in 2 of the windows have broken. I ordered some 15-194 shoes, but they don't fit as the bottom of the channel balances look like they were squeezed. Can I order 4 of these balances with hooks at th ... (cont.)

Have tried to submit a part identification request but the form keeps getting rejected with no explaination. I need the following items replaced Item 1 (01/3) UNIQUE 27-C-30 Qty (4) Item 2 (01/3) UNIQUE 27-B-20 Qty (2) Items appear to be consistent with your S795-28 Channel Balance. The T-LOCK BALAN ... (cont.)

The last time I ordered the 28" series 795 channel balance(s795-28) a 15-195 T - Lock balance shoe came with it. Can I order a 28" series 795 channel balance with 15 - 194 T - lock balance shoes? If you can is there a different number that I need to order?

I have Identified the two sash balance assemblies that I need to repair my existiing Patriot 2200 Low E windows but am reluctant to just doing the S.O.S. time after time. The windows are only 5 years old and are not abused. I have a couple of broken sash springs. They are your plain 30C and Plain ... (cont.)

S795-27c. Comparing old channel to new. New channel is 27 in and old seems to be 28in. Will the new ones still work or do I need to return for longer channel? Marvin L Johnson Jr

I ordered 13 of item 26-366. The attached picture shows the original part which is not rectangular and will not fit in the s795 - 28 balance that I ordered. The replacement pivot bar is too short and allows the balance to slide off the foot. Please consider alternatives for the pivot bar and advise. ... (cont.)

The spring length is 13 7/8" The balance channel length is 28" The channel is 1/2" deep on the outside The channel is 1/2" wide on the outside The only number stamped on the channel is 288 Please supply your part number and cost for two of these? Question: Are the left and right side bala ... (cont.)

lock shoes for tilt window vinyl sash.channel rod has a 3 digit stamp - 28C. unit broke and needs to be replaced. also imstruction on how to install if needed, please

THANK YOU VERY MUCH.

re: 28" Series 795 Channel Balance 1. is the cord attached already? 2. How do I remove the bottom pivot shoe from my existing window? Is there a screw? Does it just pop out? Twist and turn? Thanks.

Hello. Attached is an image of a balance shoe and also the window decal/info for a MW Classic window I have installed at my river home. These windows are about 8 years old, and these "shoes" have deteriorated. I looked at your images of various shoes and could not identify a match. I would be most ... (cont.)

Hi, I have a Patriot window with a broken T-lock balance shoe that needs to be replaced. It's my understanding that neither the 15-194 nor the 15-195 would fit my "old" channel balance, so I would have to replace the entire channel balance. It appears that I would need the S795. Below is a pictur ... (cont.)

The shoe has a metal post that comes out of it that goes into the window itself. It rotates to allow the window to tilt in. Need either a replacement shoe or the whole track. Thanks

I ordered part S795-28, option 28D, 28" Series 795 Channel Balance, (order number is 704448).My broken part has a hook on the end. The new ones have an eyelet, (see photos). Do you have a Channel Balance with the hook instead of the eyelet. My name is James

Can I order series 795 28D channel balance with hook instead of clip? John

I don't know the manufacturer of my windows. I'm looking for the replacement pivot shoe (image 1 & 2). This shoe hooks to the balance on the bar below the spring (image 3. Do you carry this pivot shoe?