Viewing all customer Discussions for:

S380-37 37" Series 380 Channel Balance

37"Long, 9/16"W and 5/8" deep, channel balance spring for a 9.2 pound window. The current balance has the number 3610B (the B is upside down) stamped on the metal channel. I can't tell for sure which end parts I need from your pictures. Can you advise? Thank you.

Single hung non tilt window.

D-36-4 are most sizes of my windows. 36-3-d is one window in pics. Springs broken. What size should i get? Will this make my windows leak being broken? I usually dont open them. But when i wash them some leak.? Thank you!

Can you help me identify these channel balances? They look to be ~37" long.

Length as measured from wing to wing is 37 inches. Balance spring for window. Please see previous communication. What part no. do I need.

I have 4 windows with this type of springs, only one spring is broke. I believe as long as I'm replacing the broken one I should replace them all.

Norandex window has channel balances on both sides. Number stamped on channel is 3650.

I need to know how much the cost with delivery i live in fortmyers

I am looking for a channel balance. The length is 37", metal to metal ends and the specs are stenciled on the picture above. Please advise

Obviously broken. What will I need to repair

Hi, I have a 37 inch long Channel balance with the ends as shown in the pictures. Do you have a complete unit like this? it's stamped with 3610 BSI.

Looking for a Swisco balancer to replace the one in picture attached. Also need top sash part also shown in the picture. 1 balancer has part #2930, shown in picture. A second balancer has a part number if #3620 which is a different sized Alcan window. Please advise if more information is needed. ... (cont.)

Hello, I mistakenly ordered the 37" series 395 channel balance. I meant to order the 37" series 380 with the winged shoe. I'm not even sure if that is correct, so I'm uploading some photos of the old shoe and a side-by-side of the old and the new one I received. I believe the 15-005 shoe is what ... (cont.)

PGT balance spring 37" long 9/16" deep 1/2" wide hemmed channel 36 5 GS Caldwell imprinted on it. Need approx 12. Please advise lead time Thanks

I have removed the channel balance but was never able to remove the window.I will need 2 37" channel balances, it has the number 3635 on it. While trying to remove the window the takeout clip broke. Will need 2 of them. Also need10 sash guides. I believe this was the original problem. Because I coul ... (cont.)

I did weight window 24 lb . Stamp on balance 3635 I measured metal part balance @37 " about 5/8 wide I think I need 2 ( 3635 ) balances with upper and lower guides and 5 upper sash guides . I Need for other windows Just to let you know before the balance broke on left side of window it was al ... (cont.)

Hi I have ordered 2 sets of channel balances so far but I ordered the wrong ones. The window is made by Anderson it?s about 18 years old. I threw out the old balances when I got the new ones. I think they were marked 350S or S350. The window weight is 33.8 lbs and is 37? long. The bottom plastic pie ... (cont.)

They look very similar in rivet pattern to the 371, but the top shoe is taller and the bottom shoe juts out below the bottom. The shoes match the 380. They come from Norandex single hung windows from the late 90's. I have a few different sizes but the balance pictured measures 29 inches without the ... (cont.)

I need side rails for Alcan vertical sliding window right and left side. Rail measures 37 inches long by 1/2 inch wide it has the numbers 3650 B. S. I. NG stamped on it. Do you have those available if not is there another brand I can use to replace. Thank you

I have got my order of S380-37 : 37" Series 380 Channel Balance but the window is not fitting. Can someone help me identity the part(please see photos)? Thanks for your help.