Viewing all customer Discussions for:

15-199 Pivot Shoe, 17/32" Thick

Need both tilt latch Both balance assemblies and shoes Coils have 5.0 35 ? One pivot arm

There is nothing listed on the parts. Need 4. Can you tell me what it is?

HI, I have a couple windows with these types of pivot shoes, and wondering if you have the replacements.DanThank you

Need new 2 triple coil balance systems. Can't figure out how to order the correct part that will fit Simonton window Info on side of window: F0933 4/22/04 2 cwp SS HWI 33.31 3 x 29.000 PL@8 0376394201001 WH 00 i7 (?)

I have a Simonton single hung tilt window with a triple spring balance on each side. Springs are good, shoe is good, the spring housing needs replacement. The housing is 4.5" high x 1.25" wide x 0.5" deep. The springs have #5.0 35" marked on them. Can you provide a part number for the spring housing ... (cont.)

Closing on my house 11/19/2021. Need parts ASAP. Each window has a dual coil spring with 5# stamped on each coil. One picture of the coil , but will post on another to include the other pictures

I need to identify this window balance. I want to replace complete mechanism.Thank You

Need tilt latches, coil balances, sash pivots for Simonton widows.H-R35-36 x 72Series 04-06 single hungP.L. #063-014code SIM-1I do have pictures I can send you.Thanks,Rich

My name is John We bought this house new in 2003, the windows are Simonton (just to avoid any confusion) and recently this spring let go and we would like to purchase a replacement or maybe two incase another goes south.The window opening this spring was in is 23" x 70" and the rest of the house is ... (cont.)

The balances on these windows are falling apart, particularly the plastic cover is just breaking into pieces and then other parts get broken when we try to open the window. I need to replace all of the parts of the balances (springs, cover and the pivot). These windows have three springs with diff ... (cont.)

Can you please find Swisco part number? let me know because i have to order for window.Thank you,Shailesh

Need replacement parts for Simonton double hung window with triple coil balance spring.

I have a Simonton window with duel springs one spring has broken but i can not find any stamp on the spring to determine which replacement i need. What are your suggestion ?

My top window falls right down when unlocked what to do to repair. Also the bottom window locks to the frame a have broken off need to put new ones in

Good afternoon , I need a replacement coil balancer (2) and I cannot find any model number on the window . It is a 30 " double hung and both coils have snapped. Pictured shows 1 coil in 2 pieces Thank you

The house we recently purchased has two different eras of tilt windows, half from the mid 80's, the other half from the early 20's. The older windows use a spiral balancer system while the newer ones use the metal coil system. (see picture) Is it possible to retrofit the older windows using a newer ... (cont.)

This is for a 2004 Simonton Double Hung Window. I added an image of the serial number from the window.Both balance assemblies are cracked on the window.

Need help to replace window balance Coil says #5.0 and 35" Plastic bright white coil holder says 3/8 dual (don't need this replaced) Bottom coil latch is 1 7/16 length and 1 1/4 width Please me me find the correct parts thank you

The make of the the window is The Window Factory, there's 3 coil on each side with the #4 stamp

Hi, I'm looking to replace some snapped coil springs on 20 year old U.S. Window Factory windows. I removed a spring and shoe from the working side on one of the broken windows to take photos. Please provide replacement part suggestions. Right now I need 10 sets of shoes and coils for this size wi ... (cont.)