Viewing all customer Discussions for:

S385-28 28" Series 385 Channel Balance

I know it's a 385 balance labeled: 27-5 FJ5 CMC 34 I didn't measure it so hopping the label will help. Thanks Mark

Hi I 'm jason ?I need CALDWELL Window Balance - 27 4 HR

Trying to replace window channel balancers 28 inches long Marking on the side reads: 27 3 B.S.I ON

28 INCH METAL CHANNEL 279 BSI re ORDERED DEC 2005 PUT IN EARLY 2006 CUSTOM WINDOW SYSTEMS VINYL FRAME please make two

I think I need a 385, but could you confirm. The length of the metal is 28" The marking on the metal is "27 3" (See Image) The ends are shown in the pictures. I believe I need 15-004, because the dimension is 1 3/32".

Went to change window out w a new on-balance broke. Need new ones- this is the stamp. Do I need to replace both sides?

I purchased and installed 11 single hung Milgard windows in June 1984 and March 1985 in Seattle, WA. I have replaced the balances in several of the windows at various times over the past 37 years and may have used incorrect balances in the past.There are quite a few variations in the existing balanc ... (cont.)

27 4 Caldwell IM (6 pcs) 24 4 Caldwell IM (4 pcs)

Hi, Im trying to figure out which balance I need. The house was built in 2002 and the metal portion of the balance is 28". It is stamped 27 5 CT Caldwell. As you can see from photos the top and bottom tips are winged. Thanks, Tom

Hi, My name is Jerry & I need two replacement Caldwell springs. The only markings say 27 4 GR Caldwell. The metal channel is 28 in. long. By looking at a video I believe that the top end of the balance spring is part number 15P142. I believe the bottom end is 15P102 because it is 1 1/16 in. wid ... (cont.)

block & tackle channel balance marked "27 4 NM" and "BSI" or "BSL" across the top. this balance is near impossible to move along the slide. I need to replace it. would I have a choice of channel balances that would allow less force to be used opening (pulling up) the lower sash?

I have two (2) balances that are in need of replacement. The attached photos are of the first. It is 1/2" wide and 28" long (metal to metal). The sash weighs 35 lbs. I am in need of 4 of these.Thank you,Bill

I have 9 windows that need to have the channel balance replaced. Do you have a BSI 27-5 with winged guides? See photos.

I am looking to replace a window balance for a non tilt window. My home was built in year 2002. The windows are original. The metal part of the balance is 28 inches long (without the plastic parts protruding). The stamped marking on the photo reads, "27 4 BSI nj." Thank you, Dave ... (cont.)

I have 10 windows in my house that all have the Yale Ogron Window Series 58 in them. I have one that needs Replacement Balances. If this works, my plan is to do the other 9 windows. Markings on the Channel 2740 Overall length 28inches I have more photos if needed.

Hello, I am seeking a replacement channel balance. My original part has the markings 27-3 IX CMC 11 on it. I have uploaded photos of the part. Thank you. Best, Reid

Need a pair of replacement Channel Balances. Photos of current part are attached. Notice the markings: 2790 BG B.S.I. 30 shown in one photo. The metal part is 28" long and 9/16" wide. The sash weighs 33.6 pounds.

Please help with this part number and let me know if you need other pics, more information.25 lbs, 30" ..... (9/16")27 4 BT Caldwell(A couple years back we replaced for another window in this home and they were S385-28 : 28" Series 385 Channel Balance).Thank youPatrick

Part that I picked from your website 28" Series 380 Channel Balance S380-28 option: 2730

I have window channel balance that broke It measures 28 inches long, 1/2 inches wide with a stamp 27 3. Is series 385 28, option 2730 the right replacement part? Thanks.