Viewing all customer Discussions for:

15-204 3/8" Coil Dual Support

The white plastic cover for the flat coil-based balance spring has weakened in the sun, causing it to crack, making it difficult to open and close the double hung window. It appears the shoes and the coils themselves are intact, though perhaps one of the coils is a little bent. The locks on the wind ... (cont.)

Hi,I'm looking to replace springs and plastic covers on my Simonton dimension 1 windows. House was built 2000 and all springs are broken now.Would you please tell me which parts do I need to order or what other info's do you need from me so you can tell me exact part numbers and the price.Looking fo ... (cont.)

I need these parts. Thanks.

Hoping to replace all 3 parts in all windows in my home

I do know that I need 15-199 pivot shoes, I do know that I need Series 165 coils, but I dont know the balance....please help me. Based upon what I have learned from your experts, I think in a lot of my cases it is just the coil cover/retainer that has dry rotted, and the coils and shoes are fine. ... (cont.)

I need the plastic cover as seen in picture. Must be curved at top

Do you know what part this is for Alenco window?

Hi I need the balance assembly including the shoe for a simonton single hung vinyl window. Window is roughly 15- 20 years old.

I need to determine the size of springs I need for these windows. The original springs are 3/8 inch wide, but I could not find any markings of the weight for each spring. The windows are 33 3/8 x 29 inches. The plastic cover is for 3 springs, but there are only 2 springs in each one. How do you d ... (cont.)

Hello, I wanted to know if you guys carry a double coil cover that is thinner than the 15-204? I've attached a picture. The 15-204 is at the top. It's too wide to fit inside of the window frame. Specifically the 2 plastic pieces on the back.

I have some tilt windows, and I need to replace all the hardware pieces. I'm stumped on the spring, the ones on there right now are double springs. The top of the spring assembly needs to be rounded/beveled/sloped to let the tilt catch pass over without breaking the plastic. I pulled out one of the ... (cont.)

We have determined that the coil balance ins #6 but are uncertain on the parts numbers for the standard support and the pivot shoe. I need those identifiers to order the right part.My Simonton window mechanisms have broken on some of my windows. I noticed when taking them apart that the ones that b ... (cont.)

I don't have a number for the white plastic part in #150902. The coils have #5.0 39" PAT523208 (not sure if this is patent number) The other part and it may be a patent number as well. 4.610.108. The number on the window sticker is 24340040/07 35.50 59.50 PFSHMH F0876. I am not able to locate ... (cont.)

I'm looking for the part in this picture. We recently bought a house and all the windows have this on both sides of each window. Four of them have cracked and broken this summer. It looks simple enough to replace the part but I cannot find it.

I'm not sure what this part is called but I need to order left and right replacements.

Attached is photo of the window pn tags and a good coil cover. Not realizing, wife took screw out of one and it recoiled down and broke the cover on the other side into 8 pieces. Can you help ID?

i need help to determine what window company this balance fits i need aprox 10

I have Simpton windows in my house. They were new in 2000. Many of the plastic parts now need to be replaced due to age, cracking, and breaking. Can you provide me with the part information?

Hello, I have a broken coil balance in my window but haven't been able to find the best replacement parts.

Hi, Our house was built in 2000, and all of our tilt latches and dual coil covers are crumbling to pieces. The bar code says Monton Windows, not sure if its the same as Simonton or not. I have bought a couple products but nothing fits. For example our tilt latch appears to have a Top Plate length of ... (cont.)