Viewing all customer Discussions for:

62-106 Tension Cord Hook

25.5" l x .55 wide- stamp 25 4

Length: 27" Stamp: 2630 BSI ET Manufacturer/Year: Unknown Count: Need 2 Total Balances

Spring balance in a 24 year old Milgard. Measures 9/16" wide metal is 30-5/8" long. Length including plastic ends is 32". The plastic bit on the big end is 1-1/16" deep and 7/8" wide at the ears.

I'm looking to replace the channel balance on my windows. They are marked as 27-4 (photo attached) with bottom guides that I'm having trouble finding. If you can help identify the same part, I'd really appreciate it. Thank you.

Looking for balancer 9/16 width 22" 2120 See photo showing bottom of balancer no shoe on top. Customer is drilling hole at top to secure balance. Picture also shows the original balancer which was 20" with a tab to mount with no shoe on other end.

Paramount Vinyl Windows. I have a couple of cords that have snapped in the single hung window shown. The part has a cord with a clip on them as shown. What is this part and how do I replace it? And where do I get the part? Single hung windows 34x58 interior dimension. Would like to order some p ... (cont.)

The brand window is a Summit series 8880 The metal piece is 26 11/16 inches long. The width is either 1/2 inch or 9/16 inches. It is kind of in between the 2 measurements. The problem seems to be that a slim little piece of plastic that keeps the hook from rolling all the way, is broken off. The win ... (cont.)

Could I please get a quote for 1 set (2 balances) of S795-33 (33C Option) with a 15-194 shoe and a 62-106 Hook attached please? Also on the Q to order all at once please 26-201 (2) 26-420 (1) 26-419(1) Thank you

Hello, I need help identifying which part to get to replace this window balance. It's a vinyl single hung Pella window. Looks like the pulley string broke. It has a 3230 stamped on it (pic attached) and no other markings.

I have 4 Weathervane windows each with two 25" Block & Tackle Balances. One balance is located on the left side of the bottom sash, inside a channel in the sash and the other balance is located on the right side of the bottom sash, inside a channel in the sash. The metal balance measures 25". The ba ... (cont.)

When I opened my window, the window balance came apart. The window balance on the other side remains intact, but I didn't remove. The length of the balance is 30 inches and width is 1/2 inch. The balance is labeled "29HD-45"

Hi. I've got a balance that looks like an S385 unit, but on closer inspection after reading the balance tips, it appears it isn't. Channel width is 9/16 Channel metal end to metal end is 26-3/4" long Marking on channel is 2630 See pics for shoe and top fitting. Shoe toe to heel is 1-1/16". Pl ... (cont.)

Hi, We have two single hung non tilt Milgard windows that have broken channel balances. The larger window balances say 26 5 BSI. The smaller window balances say 26 4 BSI. I can't find the correct replacements, if you can please help. Pictures attached. We are selling our home next week and need to r ... (cont.)

Hi! I need 2 of these channel balances. Please let me know that you've received this message. Thank you! Daniel

My top sash guide broke. I could not identify the right part from your web site. Additionally, I cannot identify the bottom part of the channel balance. The number on the channel balance is 33 4 as in the photo. Can you help me to identify them? Thanks.Best regards,CL

I'm repairing several Milgard Vinyl Tilt Double Hung Windows. I purchased and installed several pivot lock shoes (part #15-236) and tilt window laches (part #26-243 and #26-244). Your parts were a close match for the existing parts and worked well. I would like to replace the channel balances on ... (cont.)

I need 2 window channel balances with a length of 30 5/8 (might also be 30 9/16, not sure if it makes a huge difference).There is a 30 3 stamp on it. After looking at your website, I believe I need the s 385 (please confirm that along with the size from the photos attached) Please give me a quote f ... (cont.)

Hello. I think this part is for a Milgard window. (there's no name on the window, I just know they were purchased from Lowes). I needed to know the model number to buy the replacement. Thanks!

One half inch width. 27 5/8 " length of metal part.

I need a pair of this in 19.5 inch length. As per photo, markings on back say 19 5 BSI T E. The T might be an arrow pointing up, hard to tell. Please advise. Thank you!