Viewing all customer Discussions for:

S160-05 5.5 lbs Series 160 Coil Balance

Hi There, I need coil balance (Sears) for 19 lB Sash, Is your S140-10 right one to use? Please see my photo attached. Thanks a lot!

Marking on one of two springs says 5.5#, 33". I need 6 of these to repair 3 windows. Including posts. Post is 3 inches long with hole at 2 inches. Thanks for helping me be sure what I need to order

Hello! My name is Thuyvan Le. I'm looking for the replacement part for my broken window. Here's what I need: 1/ Tilt latch 2/ Pivot lock shoe I couldn't find the brand or model of my window anywhere, so I measured my broken parts and giving as much information as I can in the above picture, hopeful ... (cont.)

Dear Sir/Madam, Our window is hard to be left also will not stay at left position. After took the sash off and found springs on both side are damaged, each side has two pieces of springs. I can only find "MEGA 6.5 33""makings on one piece of the spring and can not found anything else. The sash siz ... (cont.)

Window is approx 29lbs. Coil spring - 3 springs each side - #5.5 5". P - 232208 - Aug 04 Coil spring cover - part # 801030 Pivot bar - 3" - seems to be 26-378 from your website? Need help identifying part #'s to place order. Thx

To whom it may concern. I own and manage 24 rental properties in Baltimore. Some of the windows need replacement springs and I am wondering if, based on the attached photos, you could give me your best guess for what parts I need to order. The windows are 34x60 (which hopefully will help guess the c ... (cont.)

Lower tilt out vinyl sash weighs -23 lbs and is 36" tall so probably need 35" travel. Old balance assembly has 2 coil springs as shown in picture. Springs are 1/2 wide with 5 stamped on one spring and #6 etched on other spring. Pivot shoe pictured checks 9/16" x 1 1/4" x 1" tall. No marking on spri ... (cont.)

The existing and missing is .5" x 1.25". on all windows, which are from the same batch. So the base shoes, base pins are the same. I have 2 lower sashes, 15 lb each. Can I get coils (4), base shoe (4), coil covers (4), pins (4) I have one lower sash, 18 lb. Could I get coils (2), base pins (2), ... (cont.)

I need to replace two springs (attached to one another). The springs are 1/2" wide. As you can see, there is some corrosion where the printed info is. Thank you

The springs have broken and need replacement parts. I hope your company has these.Thank you Ken

Markings say #5.5 and 35", PAT523208. I believe they're Simonton windows. I'll need to replace coils, shoe and support. Thank you in advance for your advice!

4 tilt showsTwo tilt latches 4 tilt pins Let me know if you need more infoMy name is Philip

Hello Swisco.The window shown in the uploaded image slides down when opened. I've removed and reinserted the to Coil Balance items but the issue remains. Wondering if replacement of the coils would address the issue.The window is 24-25 lbs. Looking to confirm if this is a good tact and then corre ... (cont.)

I have some Trilite windows in my home with broken springs. They have double coil springs that say, "5.5 33" Pat5232208"on them. Could you please help me select the right replacement parts, I need several. Thanks,George

I need both shoes, coils, and triple supports for a bottom sash. The removed coils are marked 5,6,6 that should I believe equate to a the weight value of a 34lb sash, but I put the sash on the bathroom scale and it reads 40lbs. I presently have items sitting in the cart, but would appreciate verific ... (cont.)

Hello, I'm needing to replace coils and acny parts you suggest on my 36" wide single slide kitchen window.

Trying to ID this coil type balance. The closest thing I can find is a roller tilt, they are not the same.

Please help identify the coil balance assembly I need to order to replace these

I need the whole mechanism. There is a 5 stamped on the coil.

I have a ten year old Simonton Double Hung vinyl window in which the upper unit has failed coil balances and on one side the pivot bar has broken and a missing sash vent stop. I'd like to acquire the appropriate parts (replacement pivot bar(s), balance springs and while I'm at it, probably good to ... (cont.)