Viewing all customer Discussions for:

S160-06 6.5 lbs Series 160 Coil Balance

Hello, I'm looking for the L&R coil balance for a double pane window with a sash that's 33" x 18"with pivot bar photo...window weighs just shy of 13 lbsMany Thanks,Jim C

I need to find these vinyl windows pulls. They are of a coil resemblance, appears to be from the 90's. I have almost non legible numbers that appears to be the serial and maker number identifier. Please let me know if you carry these.

hi! my name is David Robertson. I am a glazier in Scotland with 35 years experience. I was called out to a upvc double sliding window and found it to contain double coil balances. I have never seen this system in the UK before. I've emailed guys with a near half century experience and they have n ... (cont.)

These are from my 19"W x 44"H bathroom window. 1/2" wide. Numbers written on the spring are 5232208, 35" P, #6.5. Photo is just of half of the spring (the other half is broken off)

I'm in need of these window balancers and pins 4 of each, the coil looks to have a 6.5 on the end. Please let me know if you can help or need more information. Thanks Scott

Pat#5704165 one top block says 1 and the other3

Window will not stay up. The plastic cam housings and pivot lock shoes have cracked under pressure and broken off. I believe part of what I need may be #15-087 balance coil. Not completely positive that this is correct. The window pane measures 16.5"X31.25". When I opened and tilted window pane to ... (cont.)

Good grief! First time window repair. Bought 1997 home and a lot of these are broken Can't find MFG info. Numbers barely visible on spring on bottom pivot: 6.5 33" T523203 ??? Smaller inner coil has a "3" on it. Upper unit attachment ends are missing. Marking on upper has ? 9 Thanks for any ... (cont.)

Lower tilt out vinyl sash weighs -23 lbs and is 36" tall so probably need 35" travel. Old balance assembly has 2 coil springs as shown in picture. Springs are 1/2 wide with 5 stamped on one spring and #6 etched on other spring. Pivot shoe pictured checks 9/16" x 1 1/4" x 1" tall. No marking on spri ... (cont.)

on the plastic piece is the number 13.on one spring is: #6.5 35"on the other spring is: 6.5 35"V8W1 Z second line" NOV/30/15/ 6please advise what I need.Thank you Wayne

Simonton and Home Depot can't help. The windows are twenty years old andneed several parts. Hopefully you can identify them. Thank you for your help.

I have double hung windows with with 2 coils to each constant force spring housing. The top coil has stamped on it 6.5 PAT5 8. The bottom coil has a 3 stamped on it. Both coils measure right at 0.496 inches diameter using a caliper. The top coil thickness is @ 0.181 inches. The bottom coil is @ 0.15 ... (cont.)

This window does not stay up. It keep sliding down. The hardware use double coils, each coil is marked #65 35". Do you know if you have replacements for the hardware? Thank you!!

This hardware is from a vertical sliding window, with 2 panes sliding up/down. Total 4 assemblies for this one window. The pictures are from on of such assemblies. I could not find any markings on the plastic casings. The only marking I found was on the coil (see pic) which shows a 9 (or 6). I need ... (cont.)

when i replace both sides, should the spring attach to the different side (inside and outside) of the the bottom part to be balanced on the left and right?

I need both shoes, coils, and triple supports for a bottom sash. The removed coils are marked 5,6,6 that should I believe equate to a the weight value of a 34lb sash, but I put the sash on the bathroom scale and it reads 40lbs. I presently have items sitting in the cart, but would appreciate verific ... (cont.)

looking to buy the sliding hardware, the existing coils are broken. it says #7.5 31" PAT523208 on the coild

Left and right constant force balance wrotten 12 on top 2

Hello, My bathroom window balance coil broke on both sides of the window. The coil has #6.5 35" P stamped on it. It also has the number 5232208 stamped in the same place. Not sure what parts to order. Please help.

Approx. 20 yr old BF Rich window, 28"x ~48". can't find similar parts on website. The measured depth is 1/2", width 1-1/4". I think it say 6 pounds (maybe 9 if reading upside down), but 6 lbs seem right for size of window??