Viewing all customer Discussions for:

S160-06 6.5 lbs Series 160 Coil Balance

I would like to know what part can replace a tackle balance for a plygem 1500 series window.

I need to replace my coil balance in my vinyl double pain tilt out windows. I believe both sides are broken the pic I sent is of just one side. It reads x6.5 35" 15:15 SM7 D18 on the side of the coil

model number of window is hr-25 48x80 which I assumed was 25 lbs. one coil clearly says #6.5 and I think the other one says #4.5 trying to figure out what parts I need to replace. I've got several windows with one or two broken balances but a few different size windows so trying to understand how ... (cont.)

hello, looking for a replacement window balance. part number says 5.232.208 on the actual housing (it's cracked) I will also need a replacement coil, the one that broke has the number 6 on it. the etching on the window says 'American Vinyl '17 '

hi-correct me if im wrong but i believe the proper replacement part for the pictured coil balance would be your series 160 6.5 i plan on ordering 25 pieces as well as 25 of the 7.5 i also need a 12 that i dont see listed online....is 10 the largest size number you stock? thank you very much!!! ... (cont.)

Trying to get part number, price & delivery for(see attached picture); Appears spring( #6.5 33")only has broken but would like complete kit if available. Current window is single hung, small bathroom window. Label on window reads; ABC Supply Company / Jefferson, La. / D0180 Simonton Windows 1701052 ... (cont.)

The balance measures 9/16×1-1/4 and looks like a single coil. It's for a single hung window. The bottom sash measures 28w x 23t. I took it apart and put it back together so they could continue to use it. I didn't think to weigh the window . Thank Tony

I have a ten year old Simonton Double Hung vinyl window in which the upper unit has failed coil balances and on one side the pivot bar has broken and a missing sash vent stop. I'd like to acquire the appropriate parts (replacement pivot bar(s), balance springs and while I'm at it, probably good to ... (cont.)

Visions 3500 Production dste 6.10.2020 Single hung tilt 9109 36x60

Hello, Attached are pictures of the balance assembly from my BF Rich Dual Hung Window. It weighs 25 lbs. Can you tell what replacement parts I need? Thanks, Rob

am trying to replace constant force balance in the double hung windows. Parts 15-191 - Heavy Duty Pivot Shoes 15-150 - Coil Single Support look the right ones am not sure about S-160-6 Coil Balance as it looks different from the coil balance (the old one has a bend for additional tension where as S ... (cont.)

Hello there,I have a broken balancer spring and balancer plastic holder. Could you please mail me 1 spring and the plastic holder already together. The spring is stamped (6.5 35") and the plastic holder has the below numbers on it: Spring plastic holder Patient 5.232.208, # 5.232.208. and below that ... (cont.)

Two springs in this. One says #6.5, 35" and the other is #3.5 35". I have Simonton tilt in window. There were two springs within this one balance. Thank you.

Hello Swisco Expert! I need to replace a sash window coil balances pair. Please see attached photos, which include measurements. Additional info: - The shoe is stamped 550 Pat.#5,704,165 - Coil springs are 1/2" wide. The coil closer to the shoe is stamped with the number 8. The coil further away f ... (cont.)

It is a triple coil balance, and the only readable numbers on on the coils them selves - #6.0 35" for the top two coils, and #5.0 35" for the bottom coil. From a Simonton Double Hung window.

My single hung window (approx 40w x 66h) will not stay open and coil balances and one pivot shoe (broken) need replacing. Each side has two coils one numbered 6 and one 7. See attached photos. Do you have these parts? The left side has 2 coils at top and a coil further down...is this correct ins ... (cont.)

Mostly I need 20 of the sash pivots but would be happy to replace the plastic housings for the 20 tension coils as well. The plastic housing became brittle w/ age and cracked when I was removing one of the window sashes to replace a broken pane. I'm guessing all five of the condo's double-hung vin ... (cont.)

The metal coil seems to be the only thing broken... but i will buy whatever i need to repair the window. Can you help me identify appropriate replacement parts? The white part that houses the metal coils is stamped with part# 801020. It also has "#6.5" and "#7.5" on it.. which i assume is associate ... (cont.)

I am having problems with my Reliabuit 3301 window. The balance cam peg that holds the coil spring broke off. I watched your video so I can replace it if you have one. The window is large and has 3 coils. How do the coils tie together? Thanks

I am attempting to repair a window with coil that snapped. The window parts came from B.F Rich, which I believe is out of business. I was looking at the S140 on your site, but I'm not sure if that is the right part for me. Also, I don't know what weight I need. I looked all over the parts that I rem ... (cont.)