Viewing all customer Discussions for:

S380-27 27" Series 380 Channel Balance

Windows balance spring Numbers on balance 26 9 JW CMC 7 Measures: 27" length, spring space width 1/2" Spring space depth 5/8"

Hello, I have Milgard windows and a few of the balancers broke. I want to be sure I select the correct replacement parts. Attached are photos of one of the balancers. Marking shows 26 4 JW CMC 7. It measures 27in long and 5/8 wide. Please let me know if there is any additional info you need in helpi ... (cont.)

1/2" wide 27" long Need to identify and replace the window balances shown. I believe the markings are 26 4

27 in.26 3 in 5 cmc 43I need the sash guide also.Thanks

Hi, I recently had one of my window channels break and I'm unsure as to which model I am supposed to buy, and where to buy it. I've attached a picture of the side channel and codes that are on it in hopes that you can help to guide me purchase the correct replacement. I've attached a picture of th ... (cont.)

I need to get some new channel balances. It's 27 inches long(metal). With hook. The end has little wings.

I need to replace some channel balances I think the measurements are: 17 pounds, 1/2" channel width, metal length of balance is 27", the fittings have wings on both ends, I think the bottom shoe is slightly more than an inch. The marking on the balance shows "26 3 BSI 00" Please see pictures. ... (cont.)

They are Marked 26 5 JO Caldwell and They are 1 inch depth across the bottom bracket by 27 long and a half inch wide Thank you

27"length stamped 26 3 Kinro windows I need to replace 1 balance please Aaron

The plastic ends ar 15/16 inch wide at the widest part of the tabs. The metal track is 1/2 inch on the narrow side and 5/8 on the wide side. The top of the spring does not have a pulley and it is anchored inside of the metal channel. On the backside of the metal channel there is an imprint that read ... (cont.)

Hi, the closest match i could find was a 27" series 385, please confirm, or do I need something different? I have 2 windows that the piece has come off and windows won't stay open and shimmy to the point of coming out?

1/2" width 27 length Outside track is stamped with 26 4 IW CMC 11 Any assistance would be greatly appreciated. -Robert

Hi there, I'm looking to replace 2 channel balances for my windows the writing on both is (26 4 10 Caldwell) they measure at 27in. Thank you!

Hi a I need to replace 2 balance springs and not sure which to order. Shows 26 4 and BSI 1/2 inch wide x 5/8 inch high Thank you Penny

The balances I need are for non-tilting windows, they measure 27 inches. They have a stamp with 26C USB on it

I'm looking for this part 26 4 AW CMC 7

Attached are photos of my window balance. Channel length is 27", and bottom shoe depth measured with calipers is 1.09". Sash weight is 25.4 lbs. Please let me know which of your balance I should order. Thanks Tom

Hello, I am looking to replace this sash balance, I will need 4 total.

I'm needing two replacement balances for the part listed in the pictures. The numbers are it are included in the picture (2640 BSI PP) I have purchased balances from you in the past for larger windows. Thanks!

Hello, I'm looking to replace a balancer rod that is broken. I included the stamp that is on it. Do you carry this particular one? If additional photos are needed, I am happy to provide them. Also, does it make sense to replace both if only one is broken? Thanks! Beth