Viewing all customer Discussions for:

S770-28 28" Series 770 Balance

Alarm installer drilled a hole in my vinyl window that allowed water in and rusted out the window balance. Removed it with much difficulty and some minor damage to the vinyl window chanel. Would like to find a replacement that match the original white color (photo 1) and in a width that stands a c ... (cont.)

28 C stamped on existing balance and is 28" long

I ordered some replacement window balance springs from you a while back and repaired some of my windows. Now I'm trying to help a neighbor but he has different windows and different balances, and I can't find a reference to the parts. The two photos above are the top and bottom ends. The only ide ... (cont.)

Window channel balance is from a double hung window 28" in

Window balance for PennCo window. Stamp reads: UNIQUE 27-C-30. Actual metal channel measurements: 28"L x 1/2"W x 1/2"D inside channel. J-Hook type string end. Used with your product # 15-208 pivot lock shoe

Hi, I need some advice. Recently I bought a pair of window balances from you, S770-27 - Option 27F. I picked these to replace a failed balance identified as Unique 27-F-60. I picked these because I found a link on your site recommending them as the proper replacements. I recently received the balanc ... (cont.)

I'm looking for help identifying the balance in my Pennco windows. I was able to identify that your part #15-208 is the exact right pivot shoe for my window (I don't know if that helps). I can take any other pictures of the balance that may be needed. Thank you in advance for any help you ca ... (cont.)

The Balance I have and depicted in the attached pictures has a Plain Channel, rounded corners on both ends, 28" Long (metal to metal), 9/16' Wide, 1/2" Deep, the Number 27F is stamped on the back, the Sash Weight is 34 to 36 lbs.Included is a picture of the Shoe in the Window Frame (IMG_0002)Mike ... (cont.)

House built in 2003 Pennco windows 28 inches long 1/2 inch wide do you have any of these available?

Hello, I have a large vinyl window with a broken channel balance. Can you recommend which part to purchase to repair this? Most parts I've seen either do not have the hook at the top (it's usually a white plastic mounting screw) or don't carry the size I need. Some places refer to the part as 62FC S ... (cont.)

Marked "12/2 unique 27-c-30" 28" long 9/16" wide 1/2" deep 20# window REGULAR POINTED HOOK on the end QTY Needed 14

Sash Pivot Bar , channel balance, for a tilt vinyl window and a Casement Window Replacement Operator for a bay window. I'll attach pics. Thank you

(03/4) UNIQUE 27-E-50

I have a Milestone non-tilt window that needs a new block&tackle balance. It measures 28"long, 9/16"wide at open channel side, 1/2"wide at back of channel, and depth of channel is 1/2". It has a 27C stamp as shown in the attached picture and the end connection as shown in the attached picture. I had ... (cont.)

Looking to replace channel balance Length- 28 inches (metal frame only) I believe it's type 770. Markings are -0B. ???? DB 27-7. Also looking to replace the pivot shoe that is demolished ( photo attached) There is no cutaway to remove, so any suggestions on correct part and replacement process is ... (cont.)

Hello, I am attaching a picture of the broken window in my daughters window. Would it be possible to get direction for the proper replacement for the balance and the shoes? Thank you.

I need the lock that is bigger then what I see on the website. I need it to measure 3.5 inches The balances, i need that style in a 26B and 28B. Thank you.

Hello, I am in need of two PGT window channel balancers. They look to be similar to your series 770 but they have the balance attachment product code: 15-044 on the end. The stamp on the channel says 28F. They are 1/2inch deep by 1/2 wide. Attached are some pictures. Your input is appreciated. Tha ... (cont.)

Good day, I need all the window balancer hardware for a window. I have taken pictures of an identical window's parts to try and help. I know I'll need 2 of the giant springs, What does 28D BS1 RP mean? - Which balancer would you suggest? The width/depth of the balancer is 1/2 inch. The end o ... (cont.)

I have a 28 inch set of channnel balancers needed for our customer. It uses a different clip than normal and it fastens with a clip on the top. Thank you Mike