Viewing all customer Discussions for:

S385-28 28" Series 385 Channel Balance

window balance has 2790BSILL25 on it.metal part is 28 inches long and with plastic ends it's 25 inches long.What channel balance do you suggest?thanks,Susan

I need to have the weight this balance can take. I cannot find anyone to help me with this.

Window Channel I- 28" 2740N?Hello,I need to or 4der channel balances for several windows. The string doesn't recoil. The windows frame has the label: H-LC25-54x90The existing channel balance is stamped 2740N (I think see image).Any help would be appreciated.

Hello: Your help please to identify this replacement part. I am told it is for a heavy window. Thank you. Connie

I need to order replacement channel balances for 3 sliding windows. I uploaded pictures. The numbers stamped in the metal were 27 4 for the 28 inch channel balance (need four of these), and 30 2 for the 31 inch channel balance (need 2 of these). I also need the plastic end pieces for each channe ... (cont.)

28" Channel Balance. This is for a non tilt window. The balance is 1/2" wide. It has markings on side "BSI" stamped horizontally and "27 C" below it going lengthwise. Pictures 627 and 628 show one end. picture 629 shows other end.

Length is 28 inches Width is 1/2 inches Weight of window is 16.8 pounds Narrowed it down to 350, 380, 385 but cannot tell which one of the 3

HI, I need to replace broken aluminum windows sash balances. I ordered 2 pieces a couple of moths ago, but they did not match the originals. The part I order is S371-28. Every thing looked good, except the plastic end of it is different (see attached picture with both new and old balances) ... (cont.)

Hi i am looking for a replacement channel balance for the channel balance in the picture. Dimensions are 28 inches long (not including the plastic parts at the end) and channel with is 1/2 inch wide. It may be hard to tell in the picture, but it has a stamped number or 2720sp i believe. the followin ... (cont.)

Hello I need channel balances for a vinyl single hung non tilting window. The marking is 27 4 BSI ND. The metal part measures 1/2" (9/16" actual) wide by 28". The foot is 1 3/32" deep. I don't have access to a scale to weigh the sash but it is 32"w by 30"h and is a basic dual pane vinyl sash. I ... (cont.)

Balance is 28" long and is stamped with 27 4 CALDWELL HM. Pictures include both ends including the stamped information provided. I will need a total of 4 balances for 2 windows. Bottom shoe looks like 15-004 and top shoe is similar to 19-002 but has wings as shown in picture

i have 4 windows with no channel balance...window is 36? x 30?...double pane aluminum frame...only bottom slides up and down...total window is 72? tall...what channel balance do i need...thank you mike

we need 30 of these. can you help?

Hi, please could you lidentify which channel balance I would need. The metal part is 28". Thanks! Alícia B

Looking to replace the existing top sash guides on several windows where this part is broken. The photos show one that is not broken. Also, I noticed that there are no screws holding the guide in place, just a tab that was molded from the window frame itself. Can you suggest an effective technique t ... (cont.)

26 4 dr caldwell. this is the only marking on the part i have. thank for your help. joe.

I am looking for the replacement for 28" 27 3 TN CALDWELL Please advise the option to select. Thank you.

I'm trying to find a replacement channel balance used in an Alpine window. Printed on the balance is 27 4 CALDWELL BM. The metal piece looks to be 28 inches long. Any ideas?

27HP38-40 D8A CMC 6

Hi, I have determined that we need to replace some of our channel balances with the S385-28" model. I also have a broken piece that screws into the top of sash that I think is called a Top Sash Guide. Pictures of a non-broken one in a window and of the broken one are attached. Is the 18-174 the c ... (cont.)