Viewing all customer Discussions for:

26-200 Balance Screw Plug

i need for three windows complete balance systems, the model numbers are H-R25 - 46x77. the t shaped shoe is 1 1/4 inch wide. the existing balance for a window of the same height is 32 1/2 inches. weight of the windows are 18 pounds each. it appears i will need the 26-200 balance screw plug. ... (cont.)

Hello I went to install my new spiral balances from Swisco, and the attachment point at the top crumbled. To be precise it was a plastic square part, similar to the ones pictured. So, technically speaking, the plastic part crumbled, and fell into the square hole you can see above. I tried to get a ... (cont.)

Hi,Our windows were new in 2008 (manufacturer unknown) and many of the channel shoes have broken at the end that hooks into the channel track. It looked like your 15-194 channel shoe would work but it just doesn't quite fit. The channel balances all seem in good condition (no rust, cords all seem ... (cont.)

I need the correct part numbers to replace the balances in my windows. I have attached some pictures of what came out of my window. I did not include a picture of the Print Balance part 26-021.

Please advise. I did read your instructions. This has a black tip unsure what part this would be. window is tilt. year is 1994 single hung window. approx. size 44 x 30 also looking to see if you carry the plug that is missing see photo 1

I'm looking to see if I can buy more of these clips. May house is 15 years old, and they are breaking more and more. any idea who build these windows so I can get replacements.

The old balance has 20C BSI TH on it.The metal U tube is 20" long.I have added pictures above.Can you please give me a price for a replacement if it is available?Are the end parts opposite the hook end that the window sets in available separately and a price if they are.Thank youDonald ... (cont.)

27" metal end to end

Hello,I need help finding this window balance. If you need additional pictures or information, please let me know.Thank you in advance.

(18) S795-17 : 17" Series 795 Channel Balance (18) 26-200 : Balance Screw Plug (18) 33-016P : #8 x 1" Phil Flat SS Screw is should have been 27" also need bottom pins to fit 18 each and 6 air latch img 3219

Hello, I am in need of helping identifying the replacement right and left tilt latches and pivot shoes for my single hung tilt vinyl windows. The existing tilt latches match the dimensions of part 26-244 but the design of my latches are different. Pictures below. Also, for the pivot shoe, these ... (cont.)

Hi Can you help identify this part? It is a plastic piece about 3/8" x 3/8". Its used to receive a screw that holds the end of a spiral balance in the window track of my vinyl window Thank you very much

Hi, I have Patriot windows that need new channel balances but I have no idea which ones to order. The channel is 25 inches long has the number 2500 BSI LF stamped on it but I can't find the proper channel. Any help you can give will be greatly appreciated. Thanks. Melinda

Hello! Please see attached the current crossbow balances of my windows. I have several that are broken and need replacing. A few questions to make sure I have the right parts. The window stickers say Series: twinseal double hung and part numbers include H-R15-46x77, H-R25-46x65, H-R25-42x77. Each s ... (cont.)

33" balance with metal hook that attaches at top of window. About 1/2" deep & 1/2" wide 33" long. Window would not open then when worked on & forced broke. Thank you for any help to identify the parts & I need 2.

We are looking to replace 2 channel balances as well as the balance shoes and from everything we could tell with measurements and part numbers, the shoe matches the 1-1/4" 795 closed cam and the channel balance seems to match S795-33 and has 33B etched on it. However our existing channel balance ha ... (cont.)

Home was built in 2000 by Pulte and all of the hardware in these windows has failed. I need an equivelent replacement. The windows have nothing in the way of manufacture labels that I have been able to find. My neighbor gave up trying and replaced all of his windows. I hope I can find something ... (cont.)

I need tilt out balances. These are marked 26CBSItl. They are 26" and very similar to your s795 but it has a 1" cam similar to your 15-194. I need 4 of these balances.

30 inch channel with 30C and BS1 or BSL inscribed. Pivot shoe lock has the number 4 on the clip that holds the metal part in place. Plastic part of pivot shoe looks to have patent info "pat # 4810108" though it is well worn and I may be misreading. Channel width is 5/8

when I removed the screw holding the spiral balance the plastic piece that the screw threads into cracked and came out with the screw leaving a quarter inch hole in the vinyl window frame. Can I order these little anchors from swisco? I would like to find these little plugs... Thanks, ... (cont.)