Viewing all customer Discussions for:

S152-7 7 lb Series 152 Coil Balance

We have a window that will not stay up. I have uploaded photos of the coil spring but am unsure which part(s) we will need. Please advise.

I need replacement coils but don't know the window manufacturer

Hello, I am trying to figure out what parts I need to fix our window. There are missing pieces so I'm having difficulty figuring out what to order. I attached photos of what I can see and have. The two pieces in the window still have a 7 and 7 on them. The coil appears to be 0.5" wide. I know I don ... (cont.)

hello,my double hung window has a broken balance coil, not sure about the shoe.Windows got installed by Sears back in 2018, they appear to be Aiside windows.The weight of the sash is 13 lbs

looking to replace the whole setup, coils, bushings, shoes, etc. as well as the tilt latches for the top of the sash. coils have 7K printed on them and are 1/2" wide. I believe it is the 7lb series 152, but want to confirm, as well as the rest of the parts i will need. thanks!

Attached are 3 photos of the broken # 7 coil and its housing(?) from the right side of the window. The other 2 photos are of an existing not broken coil and housing from the left side. This one reads 7E. I've ordered coils from you before and this is for the same home. But a smaller window. What ... (cont.)

I need to replace the double coil balance on a couple of windows including the plastic covers. Which should I order? I have already purchased the 15-177 slate blue coil balance shoes from you. The weight of the sash is 30lbs. The old system has two plastic holders that hold a coil in each on an axl ... (cont.)

Need 2 sets of all of the parts shown for Champion vinyl double hung. The sash is 18 inches high by 32 inches wide with insulated glass. Not sure how that equates to the coil pounds. Thank you. Don

Not sure the window manufacturer, only indentifying number/letter i can find on the part in the picture is a "D L" on the coil itself. The plastic coil covers also have an "E" on one and an "H" on the other.

This is a window balance that's stamped 7K with no other markings. It's broken and I'm looking for a replacement but I can't seem to find one that fits anywhere online.

I need some replacement coils for the sash balancer. It has two coils, both with 7K etched in them.

Need replacement pair part Balance Metal belt/spring Only marking is ABCDEF and a numeral 4

Looking for replacement parts

I need to identify the spring part #. The sash weighs 13 lbs. and the spring is 1/2 inch width.

if you have a job to repair for windows. 4 complete sets needed. is there any more information you need? and hopefully you can help us quickly as two of the windows are in operable at this time. Thank you, Randy

In the upper picture on the left, I broke one of the posts, I do have extra posts that fit this coil balancer will they work in yours? The weight of the lower sash which I need the coil balancers for is 15 pounds I need both the left and the right, I’m not sure about the post if they will ... (cont.)

The coil itself is .020" thick and is marked E7. The manufacture?/Seller is long out of business the info is in a photo The lower slide is 1.255" width and 1.5" in height and .490" Thick. The interal coil is +/- .725" with the outer +/- 1.25" The tab is the full width of .490" There are 12 loops i ... (cont.)

Window balances

The tensioner seems to be working properly but the cam is sheared off. Unfortunately i do not have a manufacturer or much more information to go off of. Thank you for any help you could provide.

I have a double coil window balance from a MI vinyl double hung that I am trying to identify. The only markings are light stampings on the springs themselves reading 732