Viewing all customer Discussions for:

S160-06 6.5 lbs Series 160 Coil Balance

I've attached a picture of the balance spring and pivot shoe. I need a replacement spring.

Please help to choose right coil balance for my window. Weight of the moving part is 13LB. Attached are the pictures from the window. If you have a good tips how to replace it ,please include them in the email. Thank you so much in advance.

Dear Swisco,First: THANK YOU for your site. You've helped us immeasurably. Could you please identify the parts above so we can get our window working again? It's a Milgard, we think Tuscany V400, double sash. The lower sash doesn't move up and down. The dimensions of the lower sash are: 24.5 by 30.2 ... (cont.)

hello, the only numbers I could find on the coil balancer is0m137 on image on window part #34.610.108 on the 2 coil covers on image part #2Thank You, Todd

If I pull the window to get a photo of the lower piece, it will take me forever to get it back in. I hope the upper piece will tell the story. I do not know the maker of these windows. The numbers on the upper piece are (as best as I can determine): on right- 5.365.638 on left- 5.232.208 (not su ... (cont.)

20 YO Simonton window. Part # 80102 # 6.5 35" P

I need to order balancers for several windows that have broken. Simonton 1994 windows.

Looking to replace these assemblies they are marked with a 14

Would like complete assemblies if available. Otherwise,I need two coil balance springs. Only numbers I can see in the plastic is a patent # 4.610.108. Also a number on the coil is 6 or a 9? Window sash is 22.5"x 22.5"x 1.5" thick. Window channel is 1.25" wide.

On the broken balance, I see Patent #'s 5.232.208 - 5.365.638 - 6.584.644. Pictures are from a similar window where the balance is working fine. Do you know what this part is?

I have two Simonton Windows with broken coil springs that need replacing. A photo of the Simonton product label is attached along with some photos of the broken coil and another coil system that is still functional. The product code number on the broken coil is partially rubbed off but based on wha ... (cont.)

Weight of larger window is about 30 pounds and small window is about 27 pounds. There is one label with 13 on small window and 14 on larger window. I installed coil spring with purchased one at right and left side of window with code S140-14. But spring coil keeps going up when set at "U" shape. ... (cont.)

Hi, have 6 windows with the same balance problem - can't see any identifying marks and in fact, the coil where it connects with the plastic broke off - actually heard them snap/break in two of the windows.Old prefab home built 2001 - will need all the parts that comprise a window x 6.Hoping you can ... (cont.)

I'm looking for replacement window springs for a "Pella" window. Can you help me?Attached is a picture showing a number I noticed on a spring I pulled out. Hope this helps. ThanksMike

A rep asked me how thick is my shoe. It's a little less than a half inch. Thickness is .530 and the width is 1.209 and the sash height is 18 in.These windows are only about 12 years old I don't know why these shoes broke. One broke then the other one, together.Thanks for your help ... (cont.)

Hi Not sure if I need 6 or 9 strength coils With the hole at the bottom it reads 6 but the shoe had 18 marked on it I'm in the UK and coil springs are pretty unusual over here only seen a few in 20 years but want to attempt this repair,from your site they look like s152 coils Thanks greg ... (cont.)

Part size 2 15/16 inch by 1 3/16 inch, not including shoe part in photo. I need two constant force window balances including shoe and coil springs. Window manufacturer is Hayfield Windows, Double Hung Window #800 Part # on photo is 801020 Window weight is 24 lbs., so need to support 12 l ... (cont.)

What should we reorder? Metal coil is 1/2" wide and has the numbers 246D Z with a 1 under the D and #6.5 354.The gray shoe is 1/2" deep, 1" in length and 1 1/4" wide and has Patent 4,610,108. The white coil housing is 1/2" deep, 1 11/16 in length at it's middle, and 1 1/4" wide and has the numbers ... (cont.)

Window appears to have been forcibly removed shearing off the springs to the window balance. Balance body and shoe appear undamaged.The springs are marked as 6.5 x 35, and #7.5 x 35" respectively.I need the two sets of springs to repair this window balance.Please advise.James

I need to find a replacement.