Viewing all customer Discussions for:

15-194 1" T-Lock Balance Shoe, Closed Cam

Good day, I am hoping to fix a window in my home. The Builders First Source window specialist referred me to your website. The window code is 1100J Integral Twin (discontinued in 2006). I need the pulley inside the balancer. I have attached pictures. Is there any way that you might have this part, ... (cont.)

Hi I have several windows that have failed balances. There preventing my windows from opening and staying open. The hook at the one end of these fixes to the top of the window frame. I assume that there is at the bottom of part of the balance that has caused the issue. I haven't looked for this part ... (cont.)

Hi, I am looking to order some replacement balancers in these two variations. I see there are codes 27B and 27C. The length is 27" + the clips and the width appears to be 1/2". Can you direct me on which replacement balancers to order?

Need both parts. Have several Pella windows with same problem. the hook mounts in a round hole at the top not sure how to remove the lower plastic piece for the widow frame I do not see a cut out in the track even if I remove the plastic top cover

On the metal channel is stamped 34B. I will need all the parts. The latches, the channel balance, and the shoes. Let me know if you have any of the parts in stock.

Good morning, I have original new (2005) construction windows. I need 2 balance blocks 28 B however the lower guide does not look the same in the picture. Also a roll of weather strip ( see pic ) channel looks to be 3/16" - tube appears to be 1/4" Last Glazing see pics 7/8" total width. Thes wi ... (cont.)

I need 8 replacement shoes for tilt out windows. The sticker on the window said Series 1110/1210/1410 as pictured. I've also included the front and back sides of the shoe. The plastic hook at the top is what broke and it won't attach to the channel balance. Can you help me find the right one so ... (cont.)

Need plain channel balance for a 2007 Jeld Wen single hung window. Descriptions below: Etched in glass pane: Jeld Wen 20070415-00027-5317MZJW 01-08 LOW-EALI-MZ ASTM E 774 Sticker on side of sash: Part 0743499Vent panel 29.5 x 35 9/167085V SHNF WHT cam lock DP R-50

Here is a pick of the balance rod with clip required for my window. Last time I order it was part# 28D balance w/15-198 clip. I have a previous order # 2344972 which was order and worked. Also have additional parts I need to add which are standard parts.

I need to replace the Tilt in Window Balances in some of my vinyl windows and have narrowed it down to the S795 32D model however, I am not sure which cam mechanism to order and I also need a hook on the end to attach the top to the window. Could someone please provide the appropriate part numbers ... (cont.)

The string on my window balance broke. From looking at your website I'm pretty sure I need a 24" inch series 795 channel balance. I see a 15-195 t- lock balance is included. I believe I would need a 15-194 T-lock. My t-lock has 3 different pat. numbers on it they are as follows: 4610108 667 ... (cont.)

I believe balancer is what I only needed. Condition for white piece and metal piece that attached to the window is OK.

I'm looking for 28C and 34B ribbed balance 1/2 in by 1/2 in with 1 in wide shoe (#15-194) and top screw clip Does it matter if the metal is ribbed or plain? Thanks Yes both are ribbed and from tilt window I'll need 4 of each (8 total) if available

I believe the replacement is your series 795 and a 15-194 shoe for I'm other posts but wanted to double check since that seems like a screw in attachment point where I have a hook.

32inches Long side Measurement 1/2 Front 1/2

I need to find this style balance with the clip in the top with 15/16 shoes

Can you help me identify all of these parts? My windows won't stay in place. I have double hung windows. From tip to tip the metal part is 26".

Pat #s found on part 6.679.000 4.610.108 D467.490 I thought I purchased the right replacement with item# 15-229 but they are not correct. I would like to return those items in order 2454772 and hopefully find the correct parts aswell. Please help!

Need correct part number. The length of the balance is 27" without the shoe. It has a marking 27B.

Good Day. My name is Mia and am employee managed to break two of these on our drive up window at once. I think I know which part it is but wanted to make sure prior to placing an order. I would like to by 4 so I have back ups. It says 22bcj on part. Thank you so much!