Viewing all customer Discussions for:

S160-04 4.5 lbs Series 160 Coil Balance

I have a 20.2 pound sash. This combination features three 4-pound coils on each side. what do I need for my windows?

I'm looking for an entire system that would go with part 801020. The window sash weighs 20#'s and need the right and left sides, including the shoe, coils and coil cover. I saw you have part 801020, but wasn't sure about the other parts. I have the shoes, but the coils broke. If the shoes can be ... (cont.)

Swisco Team, Looking for the Coil Spring balance and necessary accessories. for six windows (all same size). The current springs are Omega 5.5 64" doubled on each side. I am pretty handy so I feel I can replace myself and understand that with Simonton some mods have to be made. Confident with the ... (cont.)

Not sure which ones I need.

I was told the balances were 6eb. can you supply these please?

On the coil spring is #5.5 and 35". The window is a 26" x 21" and weighs 15 pounds. I need replacement please

I need parts for 36" x18" Simonton window Coils pivots and pivot bars. How many coils are needed? Here are pics. The coils are 1/2 " item # 4.5 23208 not sure size of pivot shoes.

Above are pictures of the two parts in my window. I need help choosing what to purchase. The window weighs 18 pounds and it's a single hung window. The top part has two coil springs in it. There are no marking on the window. I need both the left and right parts. When I try to remove the parts ... (cont.)

Hello, I have this spring on my window ( #5.0 35" PAT 5232208). two springs on each side of the window. Do you have replacement spring and related parts (plastic cover, pivot shoe)? Can you also tell me the replacement part for window tilt lashes based on the window specification that I attached w ... (cont.)

The balances on both sides are broken.The piece that attaches to the balance on both side of window sash is also broke. This is the same on two windows in house.

I need to replace this in my windows.

I have been told by the manufacturer that I have Simonton dimension 1 series windows in my home manufactured 4/16/1996. The window will not go up and down smooth. Can you supply me parts?

Can you help me find some of these? I need a bunch!!

Aloha,this is Dan from Hawaii. I would like to know if these parts are interchangeable, or if they are size specific.Could you identify what part numbers the shoes, coil and top holders are? I would need four of each of them.Mahalo,Dan

Hello, Need assistance identifying the correct replacement parts for a Simonton Double Hung 35.5 x 53.5 Contractor Series Window from 2005. I believe I have the correct Tilt Latches identified?#26-243 (LH) and #26-244 (RH) ? need 2 of each for top and bottom sash. I also believe I have the corre ... (cont.)

Hi There, I need coil balance (Sears) for 19 lB Sash, Is your S140-10 right one to use? Please see my photo attached. Thanks a lot!

Hi, I have a Simonton Dimension II single-hung windows that were installed 22 years ago, and now one has a broken coil balance. The balance has two 1/2 inch wide coils and one of them broke. The broken one is marked #4.5 33" The unbroken one is marked #3.5 35" The pivot shoe is 17/32" thick. ... (cont.)

Hello! My name is Thuyvan Le. I'm looking for the replacement part for my broken window. Here's what I need: 1/ Tilt latch 2/ Pivot lock shoe I couldn't find the brand or model of my window anywhere, so I measured my broken parts and giving as much information as I can in the above picture, hopeful ... (cont.)

i need coil balance 4.5#. The window is 1994.

Simonton h-r25-48x80 single hung series 40-17 window coil covers are sun damaged and deteriorating. At least 8 need replacement, and 2 or more coils may have been damaged by forcing the windows open and/or shut. what parts should i order?